User manual

Zoom Operation
Adjusts the angle of view.
Zooming can be operated using the following.
0
Zoom ring/zoom lever on the commercially
available lens
0
User buttons assigned with “Zoom Tele”
and
“Zoom Wide”
During the zoom operation, the zoom bar or
number will
appear on the upper right corner of the
screen.
(A P173 [Zoom Display] )
Caution :
0
Depending on the zoom speed, the zoom drive
noise of the power zoom may be recorded.
Using Zoom Ring/Zoom Lever on
Commercially Available Lens
You can adjust the preferred angle of view by
turning the zoom ring or operating the zoom lever.
Memo :
0
For details on the lens, please refer to the
“INSTRUCTIONS” of the lens used.
Using User Buttons Assigned with
“Zoom Tele” and “Zoom Wide”
1
Assign “Zoom Tele” and “Zoom Wide” to
the user buttons.
(A P45 [Assignment of Functions to User
Buttons] )
(A P113
[User Switch Set Item] )
0
Configure the zoom speed of the user
buttons
in
[Camera Function] B [User Switch
Set] B [Zoom Speed].
Increasing the value increases the zoom
speed.
2
Press the user button assigned with “Zoom
Tele
”
/“Zoom Wide” to zoom.
0
The zoom operation is performed in the
speed that has been set.
Memo :
0
This function may not work depending on the
lens attached.
Focus Operation
Adjusting the Focus
1
Turn the focus ring to adjust the focus.
Memo :
0
Using the Focus Assist or Expanded Focus
function makes it easier to focus.
(A P59 [Focus Assist Function] )
(
A P60 [Expanded Focus Function] )
Focus Assist Function
0
When the user button assigned with “Focus
Assist” is
pressed, the focused area is displayed
in color. This enables easy and accurate
focusing.
0
Select the color (blue, red or green) in the menu.
Memo :
0
When [LCD/VF]
B [Shooting Assist] B [Focus
Assist] B [Type] is set to “ACCU-Focus”, the
depth of field becomes shallower to enable
easier focusing.
(A P129
[ Focus Assist ] )
0
The “ACCU-Focus” function switches
automatically to “Off” after about 10 seconds.
0
Select the display color in [LCD/VF] B [Shooting
Assist] B [Focus Assist]B[Color].
(A
P129 [ Color ] )
0
If you use the zebra function and the Focus
Assist function at the same time, it may be
difficult to see the effect of the Focus Assist. In
this case, turn off the zebra function.
Focus Assist + Function
0
You can operate the Focus Assist and
Expanded Focus functions simultaneously by
pressing the user button assigned with “Focus
Assist +”.
Memo :
0
“Expanded Focus
” is displayed during the
“Focus Assist +
” operation regardless of the
setting in [Camera Function] B [User Switch
Set] B [Expanded Focus].
Zoom Operation
59
Shooting