User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Symptom Action
The [CH-1/CH-2] recording
level adjustment knob does
not work.
0
Is
the
[AUDIO SELECT CH1/2]-[MANUAL/AUTO] selection switch set
to “AUTO”?
0
Is Full Auto enabled?
Is [Camera Function] B [Full Auto] B [Audio] set to “Auto” in Full Auto
mode?
(A P117 [Full Auto Item] )
[
CH-3/CH-4] audio is not
recorded.
0
Is the number of recording channels set to “4ch
”?
Set [System] B [Record Set] B [WAudio]/[YAudio] to “4ch”.
(A P162 [WAudio/
Audio] )
Microphone audio cannot be
heard through
the headphone.
0
Is the audio setting configured to “IFB/RET Only”?
Set [A/V Set]
B [Audio Set] B [IFB/RET Monitor] to “Off”.
(A P141 [ IFB/RET Monitor... ] )
SD card cannot be initialized
(formatted).
0
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
(
A P48 [Write-Protect Switch on the SD Card] )
Battery alarm appears even
after loading a charged
battery.
0
Is the battery too old?
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is
[LCD/VF]
B [Display On/Off] B [TC/UB] set to “Off”? To display the
date and time, set it to “On”.
(A P133 [Display On/Off Item] )
The time is not displayed.
0
The time
is only displayed on the display screen in the Camera mode
(during shooting).
(A P170 [Display Screen in Camera Mode] )
0
Is [System
] B [Record Set] B [Time Stamp] set to “On”? To display
the date and time, set it to “Off”.
(A P165 [ Time Stamp ] )
The actual recording time is
shorter than the estimated
time.
0
The recordable time may be shorter depending on the shooting
conditions or the subject.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (
Z on the Slave
device is not displayed.)
0
Is the [TC GEN] switch set to
“F-RUN
”?
(A P80 [Synchronizing the Time Code with an External Time Code
Generator] )
0
Set [System] B [Record Set]
B [Record Format] B [WFrame Rate]
such that the two camera recorders have the same frame rate.
(A P161 [WFrame Rate/
Frame Rate] )
Cannot connect to wireless
LAN.
0
Check the mode of connection and method of setting ([
SSID
] and
[Passphrase] in cases other than WPS).
(A P196 [Connecting to Network via [HOST] Terminal (USB)] )
(A P197 [Connecting to Network via Built-in Wireless LAN u v] )
0
Even if the Passphrase is wrong,
“Completed the Setup Wizard.
Please Input the Passphrase into Your Device.
” may appear at the
browser setting depending on the type of encryption.
Adjust [Passphrase] again.
0
Set [Network] B [Connection Setup] B [Default Gateway] to a value
other than “LAN”.
(A P145 [ Default Gateway ] )
244
Troubleshooting
Others