User manual

Error Message Status Action
Record Format Incorrect
0
The video format of the file for
Clip Review is different from the
current [WResolution],
[WFrame Rate], or [WBit Rate]
setting.
Set [WResolution], [WFrame Rate]
and [WBit Rate] correctly.
(A
P161
[WResolution/
Resolution] )
(A P161 [
WFrame Rate/
Frame Rate] )
(A P162 [
WBit Rate/
Bit
Rate] )
Media Full
0
[REC] button is pressed when
the media in use has no
remaining space.
0
Remaining
space
ran out during
recording.
Replace the recording media with a
new one.
No Clips No viewable clips are found on the
card for Clip Review.
Insert an SD card that contains clips
that can be reviewed.
(A P
47 [Recording Media] )
(
A P86 [Viewing Recorded
Videos Immediately (Clip
Review)] )
No Media When the [REC] button is pressed
while a recording media is not
inserted.
Insert a recording media.
(A P47 [Recording Media] )
No Media No
recording media is inserted while
in Media mode or when the
thumbnail screen is displayed.
Insert a recording media.
(A P47 [Recording Media] )
No Clips No clips are found in the inserted
recording media while in Media
mode
or
when the thumbnail screen
is displayed.
Insert a recording media that
contains playable clips.
(A P47 [Recording Media] )
(A P97 [Playing Recorded
Clips] )
Please review the connected
devices due to over current.
Peripheral devices are connected in
an environment that is subject to
high temperature, and overcurrent
has occurred as a result.
Memo :
0
The backlight
of the LCD monitor
may automatically be adjusted
to “Dark” as a form of overcurrent
protection.
Take the necessary actions such as
removing the USB devices that are
connected to the camera. The
power of
the camera may shut down
if you continue using it in this state.
238
Error Messages and Actions
Others