User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Memo :
0
The total number of currently imported image
files and the used capacity can be checked in
[Overlay Settings]
B [Full Screen Graphic] B
[Status]. This capacity may be bigger than the
actual image file size.
0
The maximum import size is approx. 23 MB,
after combining the capacity that can be
checked in
[Status] and the size of the imported
SDP files.
0
Images that can be displayed are as follows:
0
Image Size: 960x540
0
File Size: 1MB and below
0
JPEG:
Gradation: 8 bit
Pixel format: YCbCr or grayscale
Baseline JPEG
0
PNG:
Bit/Channel: 1, 2, 4, 8
Pixel format: Grayscale, Index, True color
(RGB), grayscale with alpha, true color with
alpha (RGBA)
Non-interlaced PNG
0
When images that cannot be displayed are
imported to the camera, an error message
“Unsupported Graphic Format” is displayed on
the camera recorder while image display is in
progress. Check in advance that images can be
displayed as per expectation.
Displaying Images
Display the image from the web screen for setting
the overlay.
.
E
D
C
B
A
A
Start:
Starts the display of images.
B
Stop:
Stops the display of images.
C
Next:
Image in
display
:
Displays the next image.
Image
not in
display
:
Starts displaying from the next
image of the image at which the
display stopped previously.
Depending on the status of the camera, it may
take a while to display the next image after
pressing the [Next] button.
D
Interval Time:
Sets the display time per image.
Depending on the status of the camera, it may
take a while to display the next image after
pressing the [Start] button. A time longer than
the configured interval time may be
displayed.
E
Loop Playback:
Select [ON] to return to the first image after the
last image is displayed.
234
Broadcast Overlay
Overlay