User manual

E
Set button
Sends the
text strings in [Title 1] and [Title 2] to
the camera recorder and the tag data of the clip
is updated. Update of the tag data is possible
while recording is in progress.
F
Template input button
Enters a template phrase into the [Title 1].
(Example) Pressing the [KO] button enters KO
into “Title 1”.
G
REMOVE Button
Adds a REMOVE flag to the .xchange file of the
clip that is currently being recorded. When
recording is paused during Clip Continuous
recording, pressing the REMOVE button adds
a REMOVE flag to the .xchange file that was last
recorded.
H
Stop Record Button
Stops clip recording by the camera recorder.
This button is active only during clip recording
by the camera recorder.
I
Start Record Button
Starts clip recording by the camera recorder.
This button is active only when the camera
recorder is ready to start recording.
Memo :
0
You can enter up to 64 characters for “Title 1
”
and up to 128 characters for “Title 2”.
0
Changing (including clearing) the text in the
“Title 1” and “Title 2” boxes does not
automatically update the tag data of the
recorded clip. Make sure to press the Set button
to confirm the change. Changes in the tag data
cannot be made to clips for which recording has
already ended.
0
Input of tag data in file formats other than MOV
is not guaranteed.
0
When a recorded clip is split into multiple files,
the same tag information may not be saved to all
the files depending on the timing at which the tag
information is updated. It is recommended that
a SDXC card be used with [System] B Record
Set B [4GB File Spanning(SDXC)] configured to
“Off”.
Synchronizing GPS Time Code u
Time code information can be synchronized with
the date/time information acquired from the GPS.
(A P85 [Acquiring Positioning Information by
GPS] )
Configuring the TC Mode
Set [TC/UB]
B [TC Mode] to “GPS
”.
(
A P126 [ TC Mode ] )
Memo :
0
When [System] B [Record Set
] B [Rec Mode] is
configured to “Interval Rec” or “Frame Rec”,
“GPS” cannot be selected.
0
The Z icon lights up when the time code is
synchronized.
.
1
/60
F2. 8
AE
±0
ND1
/64
12 :34 : 56
ISO
102400
00: 00:00.00
5 . 6 f t
B 5600
K
230
Tagging Feature u w
Network