User manual

Automatic Chunked Upload to FTP
Server
Automatically splits the clips and uploads them to
the FTP server during recording at the
preconfigured time for proxy recording in Slot B
when [System] is configured to “HD+Web”.
1
Configure the time to split the clips for
automatic chunked upload
Configure the time in [Network] B [Upload
Settings] B [Auto Upload] B [Division] for
starting automatic upload while recording is in
progress.
Memo :
0
[Slot] is fixed at “B”.
Uploading Clips Manually (Manual FTP)
The following are steps to upload clips recorded in
a recording media to a preset FTP server.
All playable clips on the thumbnail screen can be
uploaded.
1
Configure the FTP server for manual
uploading.
Set [Network] B [Upload Settings] B [Upload]
to “Manual”.
(
A P153 [ Upload ] )
2
Register the [Clip Server].
0
Open the [Network
] B [Upload Settings] B
[Clip Server] screen.
0
Register the server to upload recorded clips
in the recording media to.
Up to 4 servers can be registered.
(A P154 [ Clip Server ] )
Memo :
0
For details
on the registered information, please
consult the network administrator for the server.
0
When [Network] B [Upload Settings] B [Upload]
is configured to “Auto”, manual uploading is also
disabled for slots other than the selected “Slot”.
To perform manual uploading, select “Manual”.
0
FTP transfer is disabled when [System
] B
[Record Set] B [Record Format] B [System] is
configured to “High-Speed”. To perform FTP
transfer, select a setting other than “High-
Speed”.
Uploading a Video Clip
1
Set the camera recorder to the Media mode.
0
Press and hold the [CAM/MEDIA] selection
button in the Camera mode to enter the
Media mode.
A thumbnail screen of the clips
recorded on the SD card is displayed.
0
You can upload the selected clips on the
thumbnail screen to the FTP server.
(A P97 [Thumbnail Screen] )
Uploading a Recorded Video Clip
201
Network