User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Uploading a Recorded
Video Clip
The following
are steps to upload clips recorded in
a recording media to a preset FTP server.
Configuring the FTP Server for
Uploading
For specifying the settings for connecting to the
FTP server to upload recorded clips to (domain
name, user name, password, etc.) as well as the
directory of the upload destination.
1
Open the [Clip Server] screen.
Open the [Network] B [Upload Settings]
B [Clip
Server] screen.
.
Clip Server
2
Register the [Clip Server].
Register the server to upload recorded clips in
the recording media to.
Up to 4 servers can be registered.
(A P154 [ Clip Server ] )
Memo :
0
For details
on the registered information, please
consult the network administrator for the server.
Uploading Clips Automatically (Auto
FTP)
The following are steps to automatically upload
clips recorded
in a recording media to a preset FTP
server.
1
Configure the settings for automatic
upload.
Configure [Network] B [Upload Settings] B
[Upload] to
“Auto” and configure the settings for
each of [Slot], [Cellular] and [Server].
(A P153 [ Upload ] )
.
2
Start uploading.
0
Configuring [Network] B [Upload Settings]
B
[Auto Upload] to “On” starts uploading.
0
You can also press the user button that is
assigned with “Auto Upload”.
Memo :
0
FTP transfer
is performed for the slot configured
in [Slot].
0
If recording is started for the same slot as the
one configured in [Slot] while FTP transfer is in
progress, FTP transfer will be interrupted.
0
FTP transfer is not performed while live
streaming or Return over IP is in progress.
0
FTP transfer is disabled when [System] B
[Record Set] B [Record Format] B [System] is
configured to “High-Speed”. To perform FTP
transfer, select a setting other than “High-
Speed”.
0
While automatic upload is in progress, you can
view the FTP transfer status on the Status
screen.
0
To play back a recorded clip while automatic
upload
is
in progress, you can do so by switching
to Media mode, followed by pausing the upload
and selecting the clip to play back from the
thumbnail display. Switching to Camera mode
resumes automatic upload in the background.
200
Uploading a Recorded Video Clip
Network