User manual

Memo :
0
You can turn On/Off the safety zone and center
mark displays using [LCD/VF]
B [Marker
Settings] B [Aspect Ratio], [Safety Zone], and
[Center Mark].
(A P
131 [ Safety Zone ] )
Color Bar Output
Color bars can be output on this camera recorder.
Memo :
0
The audio test signals (1 kHz) can be output
simultaneously with the color bar output.
(A P140
[ Test Tone ] )
To output color bars, follow the setting procedure
below.
1
Set the [OUTPUT] switch to “BARS”.
Color bars are output.
Adjusting the Gamma
The gamma curve can be adjusted to various
characteristics when Color Space is set to a value
other than “HLG” and “J-Log1”.
(A P
118 [ Color Space ] )
(
A P118 [ Gamma ] )
Standard : Standard gamma curve based on
video standard.
The adjustable level is 0.35 to 0.45
to 0.55 in steps of 0.01.
When the level is at 0.45, the
gamma curve becomes one that
conforms to the ITU709 standard.
Cinema 1 : Sets to a cinema-like gamma
curve.
The level can be adjusted
extensively from -10 to 0 to +10.
Cinema 2 : Sets to a gamma curve with soft
expression giving priority to high
luminance gradation.
The level can be adjusted
extensively from -10 to 0 to +10.
Gamma Variation
The typical characteristics are shown in the
following figure. The figure shows the
characteristics when “Standard”, “Cinema 1
” or
“Cinema 2” is configured and [Knee Level] is set to
“95%” for the “Standard” or “Cinema 1” graph.
.
STANDARD 0.45
Cinema2 NORMAL
Cinema2 -5
Cinema2 -10
Cinema2 +10
Cinema1 NORMAL
Cinema1 -10
Cinema1 +10
Cinema1
+10
Cinema1
0
Cinema1
-10
Cinema2
+10
Cinema2
-5
Cinema2
0
Cinema2
-10
STANDARD
0.45
0
20
40
60
80
100
120
0 100 200 300 400 500 600
SCEAN(%)
OUTPUT (IRE)
182
Marker and Safety Zone Displays (Camera Mode Only)
Camera Features