User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Display Screen in Media
Mode
When the display setting for [
LCD/VF] B [Display
On/Off] is set to “Off”, the corresponding display is
hidden.
Memo :
0
Display on the information display area can be
toggled using the
[USER4
] button.
0
When the display screen is turned off, it will
appear only in the following cases.
0
During event display or warning display
0
If “VF Display” is assigned to the [USER1(VF)]
button or [USER2(VF)] button of the viewfinder,
the corresponding button can also be used in the
Media mode.
.
Jan 24 ,2018
1920x1080
30p 50M
282min
12 :34 :56
00: 00: 00.00
1000/2000
A
JK
N
O
L
M
E
G
H
I
B
D
C
F
P
A
Voltage/Battery Power
Displays the
current status of the power supply
in use.
(A P36 [Power Status Display] )
Memo :
0
Even when the display screen is turned off and
[LCD/VF] B [Display
On/Off]
B [Battery] is set to
“Off”, this will be displayed when there is a
warning.
B
Resolution
Displays the video image resolution.
C
Frame Rate/Bit Rate
Displays the frame rate and bit rate in pairs.
D
Operation Guide
Displays a guide for the current operation
buttons.
E
Audio Level Meter
0
Displays the audio levels for CH-1 to CH-4.
.
F
Position Bar
Displays the current position in the video.
During trimming, the position bar appears in
green, and icons for the in and out points are
displayed.
6
:
Current position of the video
7
:
Position to start trimming
(In point)
8
: Position to end trimming
(Out point)
176
Display Screen in Media Mode
Display/Status Screen