User manual

c
Media Status
---- :
A card is not detected in the
selected slot, and [Tally
System] is also not set to
“Studio”
STBY : Recording standby
RREC
: Recording
REVIEW : Clip Review
(A P86 [Viewing Recorded Videos Immediately
(Clip Review)] )
STBY P
: Pre Rec recording standby
(A P92 [Pre Rec] )
RRECP
: Pre Rec recording
(A P92 [Pre Rec] )
STBY C
: Clip Continuous Rec recording
standby
(A P93 [Clip Continuous Rec] )
RRECC
: Clip Continuous Rec recording
(A P93 [Clip Continuous Rec] )
STBYC
(displayed in
yellow)
: Clip Continuous Rec recording
pause
(A P93 [Clip Continuous Rec] )
STBY N
: Interval Rec recording standby
(A P95 [Interval Rec] )
STBYN
(displayed in
red)
: Interval recording pause
RRECN
: Interval Rec recording
(A P95 [Interval Rec] )
STBY M
: Frame Rec recording standby
(A P94 [Frame Rec] )
RRECM
: Frame Rec recording
(A P94 [Frame Rec] )
STBYM
(displayed in
yellow)
: Frame Rec recording pause
(A P94 [Frame Rec] )
STOP : Unable to record to the card in
the slot
P.OFF : Power OFF
Q
: During clip cutter recording
(displayed for 3 seconds)
(A P96 [Splitting the Clips Freely (Clip Cutter
Trig)] )
CALL : Receiving call signals from an
external device, such as a
remote control unit
PGM : Receiving program signals
from an external device, such
as a remote control unit
PVW : Receiving preview signals
from an external device, such
as a remote control unit
d
Live streaming mark
When [Network] B [
Live Streaming] B [Live
Streaming] is set to “On”, the distribution status
is displayed.
(A P145 [Live Streaming Item] )
Icon Status
.
(Red)
Distribution in progress (good
connection quality)
.
(Red)
Distribution in progress (poor
connection quality)
.
(Yellow)
Waiting for connection
(RTSP/RTP only), connection
failed
e
SDI Input Mode/High-Speed Frame Rate
0
“SDI INZ” is displayed when a device is
connected to the [HD/SD SDI IN] terminal,
and [System] B [Record Set] B [Record
Format] B [System] is set to “HD(SDI In)” or
“SD(SDI In)”.
0
When [System] B [Record Set
] B [Record
Format] B [System] is configured to “High-
Speed”, the setting value for [WFrame Rate]
is displayed.
f
OK Mark
Displayed
when
OK mark has been appended.
(A P103 [Appending/Deleting OK Mark] )
g
Recording Format/Bit Rate (Enlarged Display
Mode Only)
Displays the recording format and bit rate (only
when in the enlarged display mode).
Memo :
0
The resolution, frame rate and bit rate can be
viewed on the status screen.
h
Event/Warning Display Area
Displays error messages.
(A P
237 [Error Messages and Actions] )
i
Dual Rec/ Backup Rec Display (Enlarged
Display Mode Only)
“DUAL”
is displayed in the Dual Rec mode and
“BACKUP” is displayed in the Backup Rec
mode.
(A P164 [ Slot Mode ] )
Memo :
0
Displayed only when in the enlarged display
mode.
Display Screen in Camera Mode
175
Display/Status Screen