User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
X
Time Code (I)/User’s Bit (J) Display
0
Displays the time code (hour: minute:
second: frame) or user’s bit data.
0
Example of time code display:
Display Screen
.
00:00:00:00
*
* Colon (:) denotes non-drop frames and dot
(.) denotes drop frames.
Enlarged Display
[NDF] is displayed to the right of
[TC] in the
case of non-drop frames and [DF] in the case
of drop frames.
.
00H 00M 00S 00F
NDF
R-RUN
0
Example of user’s bit display:
Display Screen
.
FF EE DD 20
Memo :
0
Use the
[TC DISPLAY] switch to toggle between
the time code display and user’s bit display.
Y
Time Code Lock Indicator
0
When the built-in time code generator is
synchronized to the external time code data
input
during
the synchronization of time code
with another camera recorder, Z lights up.
When in the enlarged display mode, [EXTZ]
is shown in the TC mode display.
0
Z lights up when [TC/UB] B [TC Mode
]
is
configured to “NTP” and the unit has
detected and synchronized to the NTP
server. When in the enlarged display mode,
[NTPZ] is shown.
0
Z lights up when [TC/UB] B [TC Mode] is
configured to
“GPS
” and the unit is
synchronized to GPS. When in the enlarged
display mode, [GPSZ] is shown. u v
Z
IFB/RET Mark
Displays
the
status of the IFB or Return over IP.
Icon Status
.
During audio feed only
.
(Yellow)
When an error occurs during
audio feed only
.
During video+audio feed
.
(Yellow)
When an error occurs during
video+audio feed
a
SDI/HDMI Record Trigger
STBY B
: When [SDI Rec Trigger] is set to
“Type-A
” or “Type-B”, or [HDMI Rec
Trigger] is set to “On” and recording
is stopped
REC B
: When [SDI Rec Trigger] is set to
“Type-A” or “Type-B”, or [HDMI Rec
Trigger] is set to “On” and recording
is in progress
b
GPS Mark u v
When [System] B [GPS] is set to “On”, the
signal reception status is displayed.
Memo :
0
The display changes according to the signal
reception sensitivity. If signals cannot be
received, the H mark appears in yellow
regardless of the [LCD/VF] B [Display On/Off
]
B [GPS] setting.
0
This item is not displayed when
[GPS] is set to
“Off”.
174
Display Screen in Camera Mode
Display/Status Screen