User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Display Screen in Camera
Mode
When the display setting for [
LCD/VF] B [Display
On/Off] is set to “Off”, the corresponding display is
hidden but it will appear for approximately 3
seconds when changes are being made.
Memo :
0
When the display screen is turned off, it will
appear only in the following cases.
0
Approximately
3
seconds when changes are
being made
0
During event display or warning display
Display Screen
.
100min
50min
282min
1
/60
F2. 8
AE
±0
ND1
/64
12 :34 : 56
ISO
102400
00: 00: 00.00
1080 /30p
SDI IN
ITU709
COMPRESS
5 . 6 f t
B 5600
K
SB P
D
E
N
L
O
P
R
V
KJ
M
a Z
e
S
Yfh dg b
U
T
X
c
Q
W
I
B
F
G
C
H
A
Enlarged Display
Enlarged Display (LCD Monitor Only)
.
B
e
V
G
C X b U a g AZ
W
Memo :
0
Only the
display on the LCD monitor is enlarged.
A
Voltage/Battery Power
Displays the
current status of the power supply
in use.
(A P36 [Power Status Display] )
Memo :
0
Even when the display screen is turned off and
[LCD/VF] B [Display On/Off]
B [Battery] is set to
“Off”, this will be displayed when there is a
warning.
B
Remaining Space on Media
Displays the remaining recording time for the
recording media
in slot A and slot B separately.
W
: Currently selected slot. (White card)
W z
: Write-protect switch of SD card is set.
W!INVALID
: SD card cannot be read or
written to, or restored.
W!FORMAT
: SD card requires
formatting.
W!RESTORE
: SD card requires restoring.
W
!INCORRECT
:
0
When the SD card is not supported.
0
When an SD card lower than Class 10 is
inserted while in the XHQ mode.
W!REC INH
:
0
When attempting to record more than 4
GB while a media that does not support
recording of more than 4 GB is inserted.
(A
P164 [ 4GB File Spanning(SDXC) ] )
The following icons are displayed during FTP
upload.
(
A P200 [Uploading a Recorded Video Clip] )
Icon Status
.
[Auto Upload] is configured to
“On” and in the standby state.
“A” is displayed at the top left
corner of the icon while in the
Auto FTP mode.
.
Auto FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated.
.
FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated.
.
(Yellow)
Error has occurred during FTP
transfer.
Memo :
0
The displayed time is an estimate.
0
Even when the display screen is hidden and
[LCD/VF] B [Display On/Off]
B [Media Remain]
is set to “Off”, this will be displayed when there
is a warning.
0
You can view the status of FTP transfer during
an upload
under [Upload] on the Status screen.
170
Display Screen in Camera Mode
Display/Status Screen