User manual

o
Password
For setting the password.
There is no default value (blank).
*
You can enter up to 31 characters when [
Type]
is set to “RTSP/RTP”.
* You can enter up to 127 characters when [Type]
is set to “ZIXI”.
Memo :
0
This item is available for setting when [Type
] is
set to “RTSP/RTP” or “ZIXI”.
o
Name
For configuring the name.
The default value is
“HC900
”.
* Enter not more than 31 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
Latency
For setting the latency mode.
[Setting Values: Medium, RMinimum, Off]
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
Mountpoint
Enter the mountpoint (character string for
identifying a stream) for streaming servers that
support multiple streams.
There is no default value (blank).
*
Enter not more than 63 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“Icecast”.
o
Latency
Enter the amount of SRT latency using an integer
between 20 ms and 8000 ms.
The default value is “20ms”.
Memo :
0
This item is selectable only when [Type] is set to
“SRT”.
o
Encryption
For configuring SRT encryption.
[Setting Values: On, ROff]
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
o
Passphrase
For configuring the SRT passphrase.
There is no default value (blank).
You can enter a passphrase between 10 to 79
characters.
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
0
This item is selectable when [Encryption] is set
to a value other than “Off”.
o
Resolution (Fixed)
This is fixed at “1280x720”.
o
Frame Rate
For configuring the frame rate.
0
When [Record Format
] B [Frame Rate] is set to
“60p”, “60i” or “30p”
[Setting Values: R60p, 30p]
0
When
[Record Format
] B [Frame Rate] is set to
“50p”, “50i” or “25p”
[Setting Values: R50p, 25p]
Memo :
0
This item is available for setting only when
[Type] is set to “RTSP/RTP”, “ZIXI” or “SRT”.
Network Menu
151
Menu Display and Detailed Settings