User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
o
Adaptive Bit Rate
If “On”
is selected, the bit rate setting value of live
streaming is set to maximum limit, and the bit rate
is changed automatically according to changes in
the network bandwidth.
[Setting Values: On, ROff]
Memo :
0
[Adaptive Bit Rate] can be configured when
[Type
] is configured to “ZIXI” or “SRT”.
* The bit rate is displayed on the status screen
only when “On” is set.
o
SMPTE 2022-1 FEC
Set to “On”
to use FEC (Forward Error Correction).
A transmission system that recovers the missing
packets
in the decoding process without having to
retransmit the missing packets.
[Setting Values: On, ROff]
* The decoder must be compatible with SMPTE
2022-1.
Memo :
0
This item
is selectable only when [Type] is set to
“MPEG2-TS/RTP”.
o
FEC Matrix
For setting the amount of FEC (Forward Error
Correction) overhead for configuring
SMPTE2022-1.
(A P226 [Setting the FEC Matrix] )
Memo :
0
This item is selectable only when
[SMPTE
2022-1 FEC
] is set to “On”.
o
Bandwidth Overhead
Enter the SRT bandwidth overhead using an
integer between 5% and 100%.
The default value is
“25%”.
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
o
Latency
Enter the amount of SRT latency using an integer
between 20 ms and 8000 ms.
The default value is “500ms”.
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
o
Encryption
For configuring the SRT encryption mode.
[Setting Values: AES-256, AES-192, AES-128,
ROff]
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
o
Passphrase
For configuring the SRT passphrase.
You can enter a passphrase between 10 to 79
characters. The default passphrase is generated
randomly.
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
0
The passphrase can be configured when
[Encryption] is configured to a setting other than
“Off”.
o
FEC
For configuring the FEC mode.
It enables recovery of data streaming packet loss
without retransmission.
[Setting Values: 6x6, 8x8, 10x10, ROff]
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
148
Network Menu
Menu Display and Detailed Settings