User manual

o
Destination Port
Enter the network port number of the live
distribution destination
using an integer between 1
and 65535.
When [Type] is set to “MPEG2-TS/UDP”, “MPEG2-
TS/TCP” or “MPEG2-TS/RTP”, the default value is
“6504”. If “ZIXI” is set, the default value is “2088”.
Memo :
0
When [Type
] is set to “MPEG2-TS/RTP”, only
even numbers from 2 to 65530 can be specified
for the port number.
0
When [Type] is set to “MPEG2-TS/RTP” and
[SMPTE 2022-1 FEC] is set to “On”, N+2 and N
+4 port numbers are also used in addition to the
specified port number (N).
o
Port
Enter a SRT port number using an integer between
1 and 65535.
The default value is
“6504
”.
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
o
Stream ID
For setting the registered stream ID of the live
distribution destination. It allows direct streaming
of multiple cameras on a single device.
The default value varies with the product model.
*
Enter not more than 63 characters.
Memo :
0
Available when [Type] is set to “ZIXI” or “SRT”.
o
Stream Key
Enter the stream key specified at the live
transmission destination.
There is no default value (blank).
* Enter not more than 127 characters.
Memo :
0
Available when
[Type] is set to
“RTMP” or
“RTMPS”.
o
Username
For setting the user name.
The default value is “jvc”.
*
Enter not more than 31 characters.
Memo :
0
This item
is selectable only when [Type] is set to
“RTSP/RTP”.
o
Password
For setting the [Stream ID] password.
For ZIXI, there is no default value (blank).
For RTSP/RTP,
a random alphanumeric value that
varies with each model is assigned as the default
value.
* Enter not more than 127 characters. Enter not
more than 31 characters for RTSP/RTP setting.
o
Latency
For setting the latency mode.
[Setting Values: High, Medium, RLow, Min]
Memo :
0
This item
is selectable only when [Type] is set to
“ZIXI”.
o
PCR Mode
For configuring the low latency mode.
[Setting Values: Fast, RStandard]
Memo :
0
Available when [Type] is set to
“MPEG2-
TS/UDP”, “MPEG2-TS/RTP”, “ZIXI” or “SRT”.
0
Configuring to “Fast” minimizes the lag but the
video image may be disrupted depending on the
shooting and network conditions as priority is
given to low latency. It is intended for use in a
stable network environment to prevent packet
loss from occurring.
Network Menu
147
Menu Display and Detailed Settings