User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Optional Adapter
H.265/HEVC streaming is possible with the use of
KA-EN200 (sold separately).
Configure to “Enable”, followed by configuring the
streaming server after rebooting.
[Setting Values: Enable, RDisable]
Interface
For selecting the terminal for live streaming.
[Setting Values: R
LAN, USB/Int. WLAN] u v
[Setting Values: RLAN, USB] w x
Server
For selecting the server for live streaming.
[Setting Values: RServer1, Server2, Server3,
Server4]
Memo :
0
The setting cannot be changed during live
streaming (when [Live Streaming] set to “On”).
9
Streaming Server
For setting the server for live streaming.
Memo :
0
The setting cannot be changed during live
streaming (when
[
Live Streaming] set to “On”).
9
Server1, Server2, Server3, Server4
* The name that is set in
[Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will be displayed in the
[Server] options.
*1 The default value is
“Server1/Server2/
Server3/Server4”.
*2 You can enter up to 31 characters and ASCII
characters.
o
Type
For configuring the system for transferring video
and audio to be distributed.
[Setting Values: RMPEG2-TS/UDP, MPEG2-TS/
TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI(SRT),
RTMP, RTMPS]
Memo :
0
Use reception devices that are compatible with
the respective transfer systems.
0
To use the “ZIXI
” setting, a dedicated server is
needed separately.
0
SRT protocol update needs to be performed
before using the SRT protocol. Doing so will
make the Zixi protocol unusable.
To enable the use of the Zixi protocol again,
perform Zixi protocol update.
0
The following items that can be set vary
depending on the setting of this item.
o
Connection Mode
For configuring the SRT connection mode.
[Setting Values: RCaller, Listener, Rendezvous]
Memo :
0
This item
is selectable only when [Type] is set to
“SRT”.
o
Destination Address
For setting details such as the host name and the
IP address of the live distribution destination.
* Enter not more than 127 characters using
single-byte
alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o
Destination URL
For entering the URL of the live distribution
destination beginning with “rtmp://
” or “rtmps://
”.
There is no default value (blank).
* You can enter up to 191 characters and ASCII
characters.
Memo :
0
Available when [Type] is set to
“RTMP” or
“RTMPS”.
146
Network Menu
Menu Display and Detailed Settings