User manual

Setup Fileu v/USB Setup
Filew x
9
Load
Loads the settings on the [
Wizard] screen.
(A P218 [Reading the Connection Settings
File] )
9
Store
Saves the settings on the
[Wizard] screen.
(
A P217 [Saving the Connection Settings File] )
9
Delete
Deletes the saved settings.
(A P219 [Deleting Connection Settings] )
Default Gateway
For configuring
the gateway to be used. Select the
terminal that is connected to the router for external
network access.
[Setting Values: RLAN, USB/Int. WLAN] u v
[Setting Values: RLAN, USB] w x
FTP Proxy...
For setting the FTP proxy.
9
Type
Select the type of FTP proxy.
[Setting Values: RNo Proxy, HTTP]
9
Server
Set the FTP proxy server name.
Memo :
0
Enter the name using the onscreen keyboard.
0
You can enter characters not more than 127
bytes using single-byte alphanumeric
characters (a to z, 0 to 9), single-byte hyphen
(“-”) or dot (“.”).
0
When [Type
] is set to “No Proxy”, changes
cannot be made.
9
Port
Set the FTP proxy port number.
Memo :
0
Enter the name using the onscreen keyboard.
0
Enter an integer between 1 and 65535.
APN
For specifying APN (Access Point Name).
* This item is grayed out and cannot be selected
if APN cannot be set for the adapter attached.
Caution :
0
The APN setting is written into the cellular
adapter, not this camera recorder.
Setting a wrong APN may result in
communication failure or expensive bills from
the telecommunications
company. Set the APN
correctly.
Live Streaming Item
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On, ROff]
Memo :
0
“On” cannot be selected if streaming is not
possible with
the selected resolution, frame rate
and bitrate combination.
0
“On” cannot be selected if connection of the
selected network in [Interface] is not
established.
0
“On” cannot be selected when FTP is running.
0
Live streaming switches to “Off” when the power
is turned off.
9
Auto Restart
When the network is reconnected after
disconnection, live streaming will resume
automatically.
0
On:
Once the
network is reconnected, live streaming
resumes automatically.
0
Off:
Live streaming does not resume automatically
even when the network is reconnected.
[Setting Values: On, ROff]
Memo :
0
When the power of the camera is turned off,
regardless of the settings in [Auto Restart]
, live
streaming does not begin automatically even
when power is turned on again and network
connection is established.
0
The setting cannot be changed during live
streaming (when live streaming is configured to
“On”).
Network Menu
145
Menu Display and Detailed Settings