User manual

Import Metadata
0
For importing metadata from the FTP server.
0
Metadata loaded by the setup files (
“User File”/
“All File
”) will be deleted.
(A P198 [Importing Metadata] )
Memo :
0
This option is not selectable if the network
connection is not established.
0
This option is not selectable while using the
network.
NTP
The time
of the videos recorded simultaneously on
multiple cameras can be synchronized by
reflecting the time information retrieved from the
NTP server in the time code.
The synchronization status with the NTP server
can be checked in the Status screen (network).
Memo :
0
If the network connection is incomplete, a
different result may occur.
0
An error of about several frames may occur in
the time code information that reflects the NTP
time.
0
It may
take a while to update the synchronization
with the NTP server. To update immediately,
turn off the power first, then turn it on again.
9
Server Address
For setting the address of the NTP server.
If this
is not configured, “Master Mode” appears on
the Status screen (network).
However, “Not Synchronized” is displayed if the
unit is not connected to a network when the power
is turned on.
Zero Config
For allowing this camera recorder to be detected
automatically by external devices (such as
switchers) connected to the same LAN.
Connection can be established via one link from
the menu of the external device.
Memo :
0
The Zero Config function is not equipped with
the function
to change the settings of the camera
recorder.
9
Announcement
For configuring the method of connection from an
external device during automatic detection of this
camera recorder.
[Setting Values: RAll, LAN, USB/Int. WLAN, Off]
u v
[Setting Values: RAll, LAN, USB, Off] w x
Only for cellular adapter connection (USB)
[Setting Values: RLAN, Off]
9
Hostname Prefix
Part of the host name can be changed.
It will appear in the format of “XXXX-YYYY.local
”
on the Status screen (network).
XXXX : Character string (maximum 8 characters)
configured in [Hostname Prefix]
YYYY : Serial number of this camera recorder
Memo :
0
When [Announcement] is set to “Off”, this item
does not appear on the Status screen (LAN,
USB/Int. WLAN u v, USB w x).
Reset Network
Restores all items in the [Network] menu to their
default settings.
Connection Setup Item
Wizard
Displays a [Wizard] screen for connecting to the
network.
Follow the instructions on the screen.
USB/Int. WLAN u v
For configuring the USB/built-in wireless LAN
network connection to On/Off.
[Setting Values: On, ROff]
144
Network Menu
Menu Display and Detailed Settings