User manual

Memo :
0
If the IFB/Return over IP audio is too loud, set
this item to “Low”. If the sound is still loud even
after setting to “Low
”, set [IFB/RET Audio ALC]
to “Off”.
Caution :
The IFB/Return over IP audio may not be audible if
all the
following conditions are true, please readjust
each setting accordingly.
0
[IFB/RET Audio ALC] is set to
“Off”
0
[IFB/RET Monitor]/[CH1][CH2] is set to “Auto”
0
The audio input of IFB/Return over IP is low
VF Audio Output
For configuring the SDI audio output from the [VF
]
terminal.
[Setting Values: IFB/RET, Camera, ROff]
Memo :
0
This audio output setting is also applied when
[SDI OUT2
]
or [HDMI OUT] is configured to
“VF”.
0
When “IFB/RET” is selected, the only options
available for the audio output are IFB and Return
over IP. SDI return audio is not output.
142
A/V Set Menu
Menu Display and Detailed Settings