User manual

AUDIO OUT Limiter
For configuring
whether to enable limiter operation
for the output of the [AUDIO OUT] terminal.
0
On:
Enables limiter operation.
0
Off:
Disables limiter operation.
[Setting Values: On, ROff]
Memo :
0
When [AUDIO OUT Limiter] is set to “On”, a
icon is displayed on the status screen (audio
output).
PHONE Output
For selecting whether to output audio from the
[PHONE] terminal
as stereo sound or mixed sound
when the [MONI SELECT] switch is set to “BOTH”.
0
Stereo:
Outputs stereo sound (outputs audio sound of
CH1(CH3) to L, and CH2(CH4) to R).
0
Mix:
Outputs mixed sound (mixed sound of
CH1(CH3) and CH2(CH4)) to both L and R.
[Setting Values: Stereo, RMix]
Min. ALARM Level
For configuring
whether to output or mute the alarm
sound when the [ALARM] volume adjustment knob
is turned to the minimum level.
[Setting Values: Audible, ROff]
Speaker Gain
For configuring the speaker gain.
[Setting Values: +6dB, +3dB, R0dB, -3dB, -6dB]
Wireless Channel
For configuring the wireless channels.
0
Dual:
Inputs the wireless Ch1 output to Ch1(Ch3)
Audio In and the wireless Ch2 output to
Ch2(Ch4) Audio In.
0
Single:
Inputs the wireless Ch1 output to both of
Ch1(Ch3)/Ch2(Ch4) Audio In.
[Setting Values: Dual, RSingle]
IFB/RET Monitor...
9
CH1(/2)
For configuring the output from the [PHONE]
terminal
during IFB Return over IP of each channel.
0
Auto:
Outputs upon mixing the IFB/Return over IP
audio with the microphone audio when IFB/
Return over IP audio input is detected. Outputs
only the microphone audio when IFB/Return
over IP audio input is not detected.
0
IFB/RET Only:
Outputs only the IFB/Return over IP audio at all
times.
0
Off:
IFB/Return over IP audio is not output.
[Setting Values: Auto, IFB/RET Only, ROff]
Memo :
0
To enable
different settings for CH1 and CH2 of
[IFB/RET Monitor], configure [PHONE] output to
“Stereo”.
9
IFB/RET Audio ALC
For configuring the audio ALC operation during
IFB/Return over IP.
[Setting Values: ROn, Off]
Memo :
0
[IFB/RET Audio ALC] is an automatic level
adjustment function that enables clear IFB/
Return over IP audio.
9
ALC Level
For setting the IFB/Return over IP audio level
during ALC operation.
0
High:
Automatically adjusts the IFB/Return over IP
audio to maximum sound level.
0
Middle:
Automatically adjusts the IFB/Return over IP
audio to middle sound level.
0
Low:
Automatically adjusts the IFB/Return over IP
audio to low sound level.
[Setting Values: High, RMiddle, Low]
A/V Set Menu
141
Menu Display and Detailed Settings