User manual

Front Mic Power
Configure this setting when it is necessary to
supply +48 V power to the microphone that is
connected to the [MIC IN] terminal.
[Setting Values:
ROn, Off]
Memo :
0
When using a microphone that does not require
a +48V power supply, make sure that it is set to
the “Off” position before connecting the
microphone.
Front Mic 1 Ref.
For setting the reference input level when the
[AUDIO INPUT CH1]
or [AUDIO INPUT CH3]
selection switch is set to “FRONT”.
[Setting Values: -30dB, -40dB, R -50dB, -60dB]
Front Mic 2 Ref.
For setting the reference input level when the
[AUDIO INPUT CH2]
or [AUDIO INPUT CH4]
selection switch is set to “FRONT”.
[Setting Values: -30dB, -40dB, R -50dB, -60dB]
Rear Mic 1 Ref.
For configuring the reference input level when the
[AUDIO INPUT CH1]
or [AUDIO INPUT CH3]
selection switch is set to “REAR”, and the [AUDIO
INPUT1] selection switch to “MIC” or “MIC+48V”.
[Setting Values: -30dB, -40dB, -50dB, R -60dB]
Rear Mic 2 Ref.
For configuring the reference input level when the
[AUDIO INPUT CH2
]
or [AUDIO INPUT CH4]
selection switch is set to “REAR”, and the [AUDIO
INPUT2] selection switch to “MIC” or “MIC+48V”.
[Setting Values: -30dB, -40dB, -50dB, R -60dB]
Rear Line Ref.
For configuring
the reference input level when one
of the [AUDIO INPUT CH1/CH2/CH3/CH4]
selection switches is set to “REAR”, and the
corresponding [AUDIO INPUT1/2] selection switch
is set to “LINE”.
[Setting Values: R+4dB, 0dB, -3dB]
CH1 Audio Level/CH2 Audio Level/CH3
Audio Level/CH4 Audio Level
9
Front, Rear/Wireless
For configuring the method for adjusting volume
level when the [MANUAL/AUTO] selection switch
of [AUDIO INPUT CH1 (/2/3/4)
] is set to
“MANUAL”.
0
Front + CH1(/2/3/4):
Adjust using the [MIC LEVEL
] knob on the front
and the [AUDIO INPUT CH1(/2/3/4)] recording
level adjustment knob.
0
CH1(/2/3/4) Knob:
Adjust using the [AUDIO INPUT CH1(/2/3/4)]
recording level adjustment knob.
0
Front Knob:
Adjust using the [MIC LEVEL] knob on the front.
[Setting Values: Front + CH1(/2/3/4), CH1(/2/3/4)
Knob, Front Knob]
(Default setting: “Front Knob” for Front,
“CH1(/
2/3/4) Knob” for Rear/Wireless)
CH1/2 Audio Ref. Lv.
For setting the reference recording level of [CH1
]
and [CH2].
(Applies to both [CH1] and [CH2].)
[Setting Values: -12dB, -18dB, R-20dB]
CH3/4 Audio Ref. Lv.
For setting the reference recording level of [CH3
]
and [CH4].
(Applies to both [CH3] and [CH4].)
0
Ch1/2 -6 dB:
Sets to a value that is 6dB lower than that of
[CH1] and [CH2].
0
Ch1/2 -12 dB:
Sets to a value that is 12dB lower than that of
[CH1] and [CH2].
0
Ch1/2 Linked:
Sets to the same value as [CH1] and [CH2
].
[Setting Values: Ch1/2 -6 dB, Ch1/2 -12 dB,
RCh1/2 Linked]
A/V Set Menu
139
Menu Display and Detailed Settings