User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P134 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P138 [Audio Set Item] )
Video Set Item
SDI OUT1
For configuring video output from the [HD/SD SDI
OUT1] terminal.
[Setting Values: On,
ROff]
Memo :
0
When a resolution with no SDI output is
selected, the setting is fixed at “Off”.
0
This item needs to be configured to “On” even
during
SDI OUT1 output from the expansion unit
terminal (68-pin) at the back.
9
Resolution (SDI OUT1)
For selecting
the resolution of video output from the
[HD/SD SDI OUT1] terminal according to the
monitor to be connected.
[Setting Values: 1080psF, 1080p, R1080i, 720p,
576i, 480i]
Memo :
0
The selectable options vary according to the
setting in
[System]/[WResolution] and [WFrame
Rate] of [System] B[Record Set] B [Record
Format].
0
Cross conversion output is not possible.
0
When [
A/V Set]
B [Video Set] B [SDI OUT1] B
[Resolution] is set to “1080p”, configuring
[System] B [GPS] to “On” changes the setting to
“1080i”. u v
SDI OUT2
For configuring video output from the [HD/SD SDI
OUT2] terminal.
0
VF:
Outputs the same display as that of the
viewfinder.
0
Camera:
Outputs from
the terminal. The screen and menu
displays can be configured in [SDI OUT2] B
[Character].
0
Return Video:
Outputs the return video in 1080p :
0
Off:
Does not output from the terminal.
[Setting Values: VF, Camera, Return Video, ROff]
Memo :
0
When a resolution with no SDI output is
selected, “Camera” cannot be selected.
0
When
[System] is set to “HD(SDI In)” or “SD(SDI
In)”, “Return Video” cannot be selected.
0
When “Return Video” is selected
0
PinP display on the LCD is disabled.
0
Audio is not output.
9
Character (SDI OUT2)
For configuring whether to show the display and
menu on the [HD/SD SDI OUT2] terminal.
[Setting Values: On,
ROff]
Memo :
0
When “VF” is selected for [SDI OUT2]
, the
setting is fixed at “On”.
0
When “Return Video” is selected for [SDI
OUT2], the setting is fixed at “Off”.
0
When [Overlay Settings] B [Overlay Function] is
set to “Enable”
0
The setting is fixed at “Off” when [Overlay
Settings]
B [Output] B [SDI OUT2] is configured
to “Off”
0
The setting is fixed at “Off
” when [Overlay
Settings] B [Output] B [SDI OUT2] is configured
to “On” and [Resolution] configured to “480i”
134
A/V Set Menu
Menu Display and Detailed Settings