User manual

9
Adjust
This item is used to adjust [Color Matrix
] to a color
according to the user’s preference.
The adjusted values of “Natural”, “Standard”,
“Cinema Vivid”, and “Cinema Subdued” in [Color
Matrix] can be stored individually.
o
Linear Adjust:
The saturation, hue and brightness of the
primary and complementary colors (6 colors in
total) can be set individually when “On
” is
configured.
o
Multi Adjust:
The saturation and hue of the 16 hue axes (R/R
+/Mg-/Mg/B-/B/B+/Cy-/Cy/Cy+/G-/G/G+/Yl/Yl
+/R-) can be set when “On” is configured.
When the USER1 button is pressed while the
multi adjustment screen is displayed, only the
colors
of
the hue under adjustment remain in the
following cases. The other colors become black
and white.
0
LCD monitor and viewfinder video images
0
[HD/SD SDI OUT2]
terminal output when [A/V
Set] B [SDI OUT2] is set to “VF”
0
[HDMI] terminal output when [A/V Set] B
[HDMI OUT] is set to “VF
”
(A P183 [Adjusting Color Matrix] )
Memo :
0
This item cannot be configured when [Color
Space] is set to “J-Log1”.
0
The setting
value of this item is stored separately
when [Color Space] is set to “HLG”.
Color Gain
For adjusting the video signal color level.
Increasing the value deepens the color.
[Setting Values: +15 to -50, Off (R0)]
Memo :
0
Images are displayed in black-and-white when
this is set to “Off
”.
0
This item cannot be configured when [Color
Space] is set to “J-Log1”.
0
The setting value of this item is stored separately
when [Color Space] is set to “HLG”.
Reverse Picture
For recording images correctly by setting this item
to “Rotate” when the lens image appears upside
down or laterally inverted.
0
Rotate:
Enables horizontal/vertical inversion of the
image.
0
Off:
Disables horizontal/vertical inversion of the
image.
[Setting Values: Rotate, ROff]
DNR
Decreases noise in the image.
[Setting Values: High, RMiddle, Low]
Reset Process
Restores all items in the [Camera Process
] menu
to their default settings.
122
Camera Process Menu
Menu Display and Detailed Settings