User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Full Auto Item
For configuring the operation of each item in the
Full Auto mode.
Full Auto
can be turned on/off using the user button
assigned with the “Full Auto” function.
Gain
For specifying the Gain operation.
0
AGC:
Sets the gain to Auto.
0
SW Set:
Follows the setting of the [GAIN] switch.
[Setting Values: RAGC, SW Set]
Iris Control
For specifying the Iris control operation.
0
Auto:
Sets the iris to Auto.
0
SW Set:
Follows the setting of the [IRIS A/M] switch on
the lens.
[Setting Values: RAuto, SW Set]
Memo :
0
This item
can be specified even if the lens used
does not have iris function.
Shutter
For specifying the Shutter operation.
0
EEI:
Sets the shutter to Auto.
0
SW Set:
Follows the setting of the [SHUTTER]
switch.
[Setting Values: REEI, SW Set]
White Balance
For specifying the White Balance operation.
0
FAW:
Sets the white balance to Auto.
0
SW Set:
Follows the setting of the
[WHT BAL] switch.
[Setting Values: R
FAW, SW Set]
Audio
For configuring the audio operation.
0
Auto:
Sets the audio sound to Auto.
0
SW Set:
Follows the settings of the
[AUDIO CH1/2/3/4]
-
[MANUAL/AUTO] switches.
[Setting Values: RAuto, SW Set]
Camera Function Menu
117
Menu Display and Detailed Settings