User manual
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Adjusting the Back Focus
- Assignment of Functions to User Buttons
- Tally Lamp
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter (Sold Separately)
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- Operation Lock Feature
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Adjusting the White Balance
- Adjusting the Camera Image
- Audio Recording
- Audio Output during Recording
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing the Time Code with an External Time Code Generator
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Video Signal Monitor
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Control and Camera Control Functions
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
Basic Operations in Menu
Screen
0
Pressing the [MENU/THUMB] button displays
the menu screen on the LCD monitor and
viewfinder.
0
Various settings for shooting and playback can
be configured on the menu screen.
0
There are two types of menu screens -
[Main
Menu] and [Favorites Menu].
0
[Main Menu]
contains all the setting items of the
camera recorder, classified according to
functions and uses, while [Favorites Menu]
allows users to customize the menu items freely.
(A P166 [Adding/Editing Frequently Used
Menu Items (Favorites Menu)] )
0
The operating procedures and main screen
displays are the same for both menus.
0
The menu screen can also be displayed on
external monitors
connected to the video signal
output terminal.
(A P134 [Character (SDI OUT2)] )
(A P136 [Character (HDMI OUT)] )
(A P137 [Character (VIDEO OUT)] )
0
The menu screen can also be displayed on the
View Remote screen.
Operation Buttons
To operate the menu, use the cross-shaped
buttons on the side operation panel of the camera
recorder or
the cross-shaped buttons at the front of
the camera or at the bottom of the lens.
.
D
C
E
G
F
A
B
A
[USER1] Button
Adds the
selected menu or submenu item to the
[Favorites Menu].
B
[USER3] Button
Resets settings in the [TC Preset] or [UB
Preset] setting screen.
C
[MENU/THUMB] Button
0
Displays the menu screen. The
[Main Menu
]
screen is displayed by default.
0
During normal usage, [Main Menu] is
displayed if the previous menu operation
ended at [Main Menu], and [Favorites Menu]
if the previous menu operation ended at
[Favorites Menu].
0
Press this button to close the menu screen
during menu display and return to the normal
screen.
0
Pressing and holding down the button while
the menu is displayed switches the [Main
Menu] screen to the [Favorites Menu] or vice
versa.
(A P166 [Adding/Editing Frequently Used
Menu Items (Favorites Menu)] )
D
[CANCEL/RESET] Button
Cancels settings and returns to the previous
screen.
E
Cross-shaped Button (JKH I)
J
: Moves the cursor upward.
K
: Moves the cursor downward.
H
: Moves back to the previous item.
I
: Moves forward to the next item.
F
[STATUS/SET] Button (R)
Sets the values and items.
G
[DISPLAY] Button
Switches between the [Main Menu] and
[Favorites Menu] screens.
Basic Operations in Menu Screen
107
Menu Display and Detailed Settings