NDI|HX Functions

© 2023 JVCKENWOOD Corporation B5A-4449-00
Memo
:
• Select “NDI
|
HX” and the camera will be ready for distribution after rebooting.
• To start or stop the distribution, select “On” or “Off” in [Network]
B
[Live Streaming]
B
[Live
Streaming]. Alternatively, use the user button assigned with the “Live Streaming” function.
• The following functions cannot be used when [System] is configured to “NDI
|
HX”.
•
Media recording (SD card/SSD media)
•
Streaming other than NDI
|
HX (Return over IP is possible)
•
FTP
•
[System]
B
[Record Set]
B
[Rec Mode]/[Slot Mode]/[4 GB File Spanning (SDXC)]/[LPCM
(QuickTime)] [Clip Set]/[Clear Planning Metadata]
•
[System]
B
[Media]
•
SD slot A/B in [System]
B
[Setup File] ([CAM1] to [CAM4] of this camera can be used)
•
[Network]
B
[Metadata Server]/[Upload Settings]/[Import Metadata]/[Zero Config]/[Reset Network
Settings]
• There are restrictions on the use of the following functions when [System] is configured to “NDI
|
HX”.
•
[TC/UB]
B
[TC Generator] is fixed at “Free Run(NTP)”.
[Device Name] has been added.
For configuring the device name displayed in the NDI application.
Default value: hc550
, hc500
The NDI application recognizes “XXXX-YYYY (NDI
|
HX, IP address of this camera)”.
XXXX: Character string (maximum 8 characters) configured in [Device Name].
YYYY: Serial number of this camera
[Group Name] has been added.
For configuring the group name to be used for the NDI application.
The default value is “public”.
NDI is a trademark or registered trademark of Vizrt Group in the United States and other countries.