INSTRUCTIONS

Splitting the Clips Freely
(Clip Cutter Trig)
You
can split the clips freely without having to stop
recording during shooting.
1
Assign the “Clip Cutter Trig” function to
any of the user buttons.
(A P
46 [Assignment of Functions to User
Buttons] )
2
Press the user button that is assigned with
“Clip Cutter Trig
” during shooting.
A clip cut icon (Q) appears on the display
screen for 3 seconds, and the clip is split.
.
100min
50min
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
5 . 6 f t
B 5600
K
4030 20
10
0
Memo :
0
Clips cannot be split again for a few seconds
after the operation is performed.
0
This item cannot be used when
[Slot Mode] is
set to “Backup Y” or “Backup G”.
0
This item cannot be used when
[Rec Mode] is
set to a value other than “Normal” or “Pre Rec”.
(A P160 [ Rec Mode ] )
0
The split clips are recorded seamlessly without
interruptions in the video.
0
When “4K EXT (SSD)
”, Exchange (U model) or
MP4 (E model) is selected, the clip cutter
function cannot be used.
Configuring Infrared
Recording
This camera recorder comes with a infrared
recording
mode that is suitable for night recording.
Using infrared illumination allows images to be
captured naturally in a pitch-dark environment. It is
recommended for observation of animals without
alerting them or for natural facial expressions
without firing glaring flash light at the subject.
1
Set the [FULL AUTO] switch to “OFF”.
2
Set [Camera
Function] B [Infrared] to “On”.
A “I” icon appears.
Caution :
0
Do not use infrared recording for capturing
strong light sources or heat sources. Doing so
may damage the camera recorder.
Memo :
0
The settings are fixed as followed when it is
configured to
“On”.
0
Manual focus
0
ND Filter“OFF”
0
[Camera Function] B [Focus] B [AF Assist]
and [MF Assist] appear as “---”.
0
All items other than
[Color Space] and
[Reverse Picture] under [Camera Process]
appear as “---”.
0
The zoom and focus positions will be initialized
after the settings are changed.
0
When [Infrared] is configured to “On”, if the type
of light source changes after focus is
established, the image may go out of focus.
96
Splitting the Clips Freely (Clip Cutter Trig)
Shooting