INSTRUCTIONS

Power Status Display
Viewfinder Screen and LCD Monitor
The power status is displayed on the display and
menu screens.
Display Description
B 7.4V
B 100min
C 30%
4 RES
Currently powered by a battery.
When the battery power runs out,
the battery mark appears hollow,
and “RES” (yellow) is displayed.
Memo :
0
You can set the display using
[LCD/VF] B [Display Type
] B
[Battery].
(A
P130 [ Battery ] )
F
Acquisition of battery information
may fail if a genuine battery is not
used.
T
Appears when an error occurs
during battery charging.
G
Currently powered by an AC
adapter.
P
Q
R
S
Camera recorder battery charging
in progress.
(A
P130 [Details on charging
condition] )
(A P130 [ Battery ] )
Memo :
0
If
the supplied battery (or equivalent battery sold
separately) is not used, the battery mark which
indicates the battery level may not appear.
Display Screen
(A P
166 [Display Screen in Camera Mode] )
(A P172 [Display Screen in Media Mode] )
.
282min
1
/60
F2.8
AE
±0
ND1
/64
12 :34 :56
ISO
102400
00: 00:00.00
5 . 6 f t
B 5600
K
4030 20 10 0
Menu Screen
(A P
108 [Display and Description of the Menu
Screen] )
.
Display Settings
Warnings by Lamp and Warning Tone
Warning status is indicated by tally lamp and
warning tone.
0
The tally lamp blinks.
0
The warning tone is output from the monitor
speaker or [x] terminal.
Memo :
0
You can specify whether to turn on the warning
tone
as well as setting the volume in [A/V Set] B
[Audio Set] B [Alarm Level].
(A P137
[ Alarm Level ] )
0
In
the event that the battery level runs low while
it is being used, the camera recorder will stop
operating automatically.
Caution :
0
The remaining battery power and time are
displayed as they are from the battery
information.
Accurate data may not be displayed
depending on the battery condition. Replace the
battery as soon as possible when the remaining
battery power and time are low.
Power Status Display
37
Preparations