INSTRUCTIONS

9
Slot
For selecting the recording media slot to enable
automatic upload.
[Setting Values: RA, B]
Memo :
0
This
is fixed at “EXT” when [System] is set to “4K
EXT (SSD)”.
9
Division
Automatically splits the clips and performs FTP
transfer
during recording at the preconfigured time
when [System] is configured to “HD+Web”.
[Setting Values: Off, 15 sec, R30 sec, 45 sec, 60
sec, 90 sec, 3 min, 5 min, 10 min, 15 min]
Memo :
0
[Slot] is fixed at
“B”.
9
Cellular
For
configuring whether to enable connection via a
USB cellular adapter.
[Setting Values: Enable, RDisable]
9
Server
For configuring the server for uploading to the FTP
server.
[Setting Values: RClip-FTP1, Clip-FTP2, Clip-
FTP3, Clip-FTP4]
Clip Server
9
Clip-FTP1, Clip-FTP2, Clip-FTP3, Clip-
FTP4
*
The name that is set in [Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will appear on the
[FTP
Upload] action screen of the thumbnail display.
* Enter not more than 31 characters.
o
Protocol
For setting the protocol of the FTP server to be
connected.
0
FTP:
Protocol
that does not encrypt the incoming and
outgoing data.
0
SFTP:
Protocol that encrypts incoming and outgoing
data using SSH.
0
FTPS:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
0
FTPES:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
0
ZIXI:
Enables stable transmission by reducing jitter
and packet loss significantly through
communicating via a relay server.
[Setting Values: RFTP, SFTP, FTPS, FTPES, ZIXI]
A
[Setting Values: RFTP, SFTP, FTPS, FTPES] B
Memo :
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
If “ZIXI” is set, the resume function is enabled.
Network Menu
149
Menu Display and Detailed Settings