INSTRUCTIONS

o
Protocol
For configuring the protocol of the video/audio
source server to be connected.
[Setting Values: RUDP, TCP]
Memo :
0
This
item is selectable only when [Type] is set to
“RTSP/RTP”.
o
Connection Mode
For configuring the SRT connection mode.
[Setting Values: RCaller, Listener, Rendezvous]
Memo :
0
This
item is selectable only when [Type] is set to
“SRT”.
o
Source Address
For configuring details such as the host name and
IP
address of the video/audio transmission source.
There is no default value (blank).
*1 A maximum of 191 ASCII characters can be
entered when [Type] is configured to a setting
other than “SRT”.
*2 A maximum of 191 characters including
single-byte alphanumeric characters (a to z, 0
to 9) and single-byte hyphen [-] and dot [.] can
be entered when [Type] is configured to
“SRT”.
o
Source Port
Enter the network port number of the video/audio
transmission source using an integer between 1
and 65535.
The default value is
“554” when [Type] is set to
“RTSP/RTP”, “2077” when it is set to “ZIXI”, and
“5000” when it is set to Icecast.
Memo :
0
When [Type
] is set to “RTSP/RTP”, only even
numbers from 2 to 65530 can be specified for
the port number.
o
Port
Enter a SRT port number using an integer between
1 and 65535.
The default value is
“6510”.
Memo :
0
This item is selectable only when [Type] is set to
“SRT”.
o
Stream ID
For configuring the stream ID registered on the
video/audio transmission source.
There is no default value (blank).
*
Enter not more than 63 characters.
Memo :
0
This item is available for setting when
[Type] is
set to “RTSP/RTP” or “ZIXI”.
o
Username
For setting the user name.
There is no default value (blank).
*
Enter not more than 63 characters.
Memo :
0
This
item is selectable only when [Type] is set to
“RTSP/RTP”.
o
Password
For setting the password.
There is no default value (blank).
*
You can enter up to 31 characters when [Type]
is set to “RTSP/RTP”.
* You can enter up to 127 characters when [Type]
is set to “ZIXI”.
Memo :
0
This item is available for setting when
[Type] is
set to “RTSP/RTP” or “ZIXI”.
o
Name A
For configuring the name.
The default value is
“HC550”.
* Enter not more than 31 characters.
Memo :
0
This
item is selectable only when [Type] is set to
“ZIXI”.
o
Latency A
For setting the latency mode.
[Setting Values: Medium, RMin, Off]
Memo :
0
This
item is selectable only when [Type] is set to
“ZIXI”.
146
Network Menu
Menu Display and Detailed Settings