INSTRUCTIONS(BASIC)

LCD Monitor and Viewfinder
o
The LCD monitor and viewfinder screen are
manufactured using high-precision technology.
Black or bright spots may appear on the LCD
monitor and viewfinder screen. This is not a
malfunction. These spots will not be recorded.
o
If you use this unit continuously for a long period of
time, the characters displayed in the viewfinder
may temporarily remain on the screen. This
phenomenon will not be recorded to the recording
media. They will not appear after you turn the
power off and then on again.
o
If you use this unit in a cold place, the images may
appear to lag on the screen, but this is not a
malfunction. Retained images are not recorded on
the SD card.
o
Do not press against the surface with force or
subject it to strong impact. Doing so may damage
or break the screens.
o
Noise may appear in the viewfinder when switching
between the live video and playback images.
o
Due to the characteristic of the viewfinder display
device, colors may appear on the images when you
blink your eyes. It does not affect the recorded
images, SDI output, or HDMI output.
GPS
A L
o
The GPS (Global Positioning System) satellites are
managed by the Department of State of the U.S.,
and its precision may be altered intentionally.
o
Perform positioning at an unobstructed location
with a clear view that is not indoors or blocked by
trees.
o
The time needed for obtaining the position
information may be longer and variation may also
be larger depending on the surrounding
environment and time of day.
o
This camera recorder uses the WGS 84 World
Geodetic System.
o
Signal from GPS satellites may be interrupted by
communication signal from electronic devices
such as mobile phones.
o
Make use of it in accordance with the regulations
of the country, region or location of use.
Copyright
o
Any recordings made on this camera recorder that
are played back for profit or public preview may
infringe on the rights of the owner of the recordings.
Do not use the recordings for purpose other than
personal enjoyment without prior consent from the
owner. And even for personal enjoyment, you may
not be able to record without permission from the
owner.
License Notices
o
MPEG LA AVC
THIS PRODUCT IS LICENSED UNDER THE AVC
PATENT PORTFOLIO LICENSE FOR THE
PERSONAL USE OF A CONSUMER OR OTHER
USES IN WHICH IT DOES NOT RECEIVE
REMUNERATION TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE
AVC STANDARD (“AVC VIDEO”) AND/OR
(ii) DECODE AVC VIDEO THAT WAS ENCODED
BY A CONSUMER ENGAGED IN A PERSONAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE
AVC VIDEO.
NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM
MPEG LA, L.L.C. SEE
HTTP://WWW.MPEGLA.COM
o
MPEG LA MPEG-2 Patent
ANY USE OF THIS UNIT IN ANY MANNER
OTHER THAN PERSONAL USE THAT
COMPLIES WITH THE MPEG-2 STANDARD
FOR ENCODING VIDEO INFORMATION FOR
PACKAGED MEDIA IS EXPRESSLY
PROHIBITED WITHOUT A LICENSE UNDER
APPLICABLE PATENTS IN THE MPEG-2
PATENT PORTFOLIO, WHICH LICENSE IS
AVAILABLE FROM MPEG LA, LLC, 6312 S.
WHICH LICENSE IS AVAILABLE FROM MPEG
LA, LLC, 6312 S. Fiddlers Green circle, Suite
400E, Greenwood Village, Colorado 80111 U.S.A.
Others
o
Do not insert objects other than the memory card
into the card slot.
o
Do not block the vent on the unit.
Blocking of the vent causes internal heating and
may lead to burns and fires.
o
Hot air may be discharged from the vents
depending on the condition of use. This is not a
malfunction.
o
Do not turn off the [POWER ON/OFF] switch or
remove the power cable during recording or
playback.
o
The camera recorder may not show stable pictures
for a few seconds immediately after the power is
turned on, but this is not a malfunction.
o
When the video signal output terminals are not in
use, put on the covers to prevent damage to the
terminals.
o
Do not drop this unit or subject it to strong impact
or vibration as it is a precision equipment.
o
Optical performance of lens
Due to the optical performance of the lens, color
divergence phenomena (magnification chromatic
aberration) may occur at the periphery of the
image. This is not a camera malfunction.
o
Noise may appear in the image when switching
modes.
Precautions for Proper Use
47
Others