INSTRUCTIONS(BASIC)

Estimated Charging and Continuous
Operating Times
o
Charging time
BN-VC296G (accessory): Approx. 5 hours
*
When the [POWER ON/OFF] switch is set to “OFF”
Memo :
0
If you charge the battery immediately after using while
the battery is still warm, it may not be fully charged.
0
It is recommended that you charge the battery in an
environment between 10 °C and 30 °C (50 °F and
86 °F). The battery may not be fully charged or the
charging time may be prolonged if charged under low
temperatures (below 10 °C/50 °F). In addition,
charging the battery under high temperature (above
30 °C/86 °F) condition may shorten the battery life.
o
Continuous operating time
BN-VC296G (accessory): Approx. 2 hrs 40 mins
(*1)
Approx. 2 hrs 50 mins
(*2)
*1 When [System] is set to
“4K” and all other
settings are in factory default
*2 When [System] is set to “HD” and all other
settings are in factory default
Memo :
0
Actual operating times may differ depending on the
age of the battery, charging condition, and operating
environment.
0
Operating time is shortened in cold environment.
0
The operating time may shorten when power zoom is
used, accessories are connected, or when the LCD
monitor is frequently used.
0
For purchase of spare batteries and battery charger,
please contact the local dealers in your area.
Using AC Power (DC IN Power)
Use the supplied AC adapter to operate the camera
recorder with AC power.
Initial Settings
When
the
power is first turned on, the Initial Setting
screen for performing the initial settings in the
camera recorder appears.
Set the date/time of the built-in clock in the [Date/
Time] screen.
All operations are disabled until initial settings are
complete.
Memo :
0
It is
recommended to use the AC adapter as the
power supply.
0
Be sure to close the lens cover.
1
Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to “ON”.
A language selection screen appears.
0
For U models
.
0
For E models
.
Pусский
Español
Italiano
Deutsch
Français
English
Language
Memo :
0
The menus and messages on the screen of the
LCD monitor or viewfinder are displayed in the
selected language.
20
Power Supply
Preparations