INSTRUCTIONS

A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P130 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P132 [Audio Set Item] )
Video Set Item
SDI OUT
For configuring video output from the [SDI OUT]
terminal.
[Setting Values: On,
ROff]
Memo :
0
When a resolution with no SDI output is
selected, the setting is fixed at “Off”.
0
When “4K EXT (SSD)”
is selected for the
[System] item, video images are not output from
the [SDI OUT] terminal.
9
Character
For configuring whether to show the display and
menu on the [SDI OUT] terminal.
[Setting Values: On, ROff]
9
Resolution
For selecting
the resolution of video output from the
[SDI OUT] terminal according to the monitor to be
connected.
[Setting Values: 1080psF, R1080p, 1080i, 720p,
576i, 480i, 480i (2:3pd)]
Memo :
0
The selectable options vary according to the
[System
] B [Record Set] B [Record Format] B
[System]/[WResolution] setting.
0
Cross conversion output is not possible.
0
When [
A/V Set]
B [Video Set] B [SDI OUT] B
[Resolution] is set to “1080p”, configuring
[System] B [GPS] to “On” changes the setting to
“1080i”. A L
9
3G-SDI Mapping
For configuring the mode of mapping for signals
output from the [SDI OUT
] terminal.
[Setting Values: Level B, RLevel A]
Memo :
0
SDI output
is configurable only when the setting
is set to “1080p”.
0
When [SDI OUT] is configured to “Off”, this item
cannot be configured.
9
Rec Trigger
For configuring whether to superimpose trigger
signals on the [
SDI OUT] terminal in tandem with
the [REC] button.
If “Type-A” or “Type-B” is specified, it is possible to
record on a device equipped with SDI record trigger
in tandem with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The record trigger output status to the connected
device is indicated by REC B /STBY B on the
display screen.
[Setting Values: Type-A, Type-B, ROff]
Memo :
0
If “Type-A” does not work, it may operate in the
“Type-B” setting, but the user’s bit to the
connected device will not be correctly output.
0
Even if REC B /STBY B is displayed on the
display screen, the compatible device may not
necessarily be recording.
0
This item can be configured when [SDI OUT] is
configured to
“On” and [Rec Mode] is configured
to “Normal”, “Pre Rec” or “Clip Continuous”.
0
Set to “Off” if connecting to a device that does
not support record trigger.
130
A/V Set Menu
Menu Display and Detailed Settings