INSTRUCTIONS

User Switch Set Item
USER1 to USER9, USER10 ▲, USER11 ▼,
USER12 ◀, USER13 ▶
Assigning one of the functions in the following
menu to the [FOCUS ASSIST/1], [OIS/2],
[ONLINE/3], [AE LOCK/4
], [ZEBRA/5], [MARKER/
6], [USER7], [USER8] or [EXP.FOCUS/9] button or
the [▲/10], [▼/11], [◀/12] or [▶/13] front cross-
shaped button enables operation of the said
preconfigured function (on/off, launching,
switching).
Set according to the shooting conditions. Usable in
the Camera mode.
(A P46 [Assignment of Functions to User
Buttons] )
[Setting Values: Cancel, Menu, Slot Select, Return
Video, Return over IP, Auto Upload, Live
Streaming, Load Picture File, Clip Review, OK
Mark, Clip Cutter Trig, Backup Trig, Rec, LCD
Backlight, Spot Meter, Focus Assist, Expanded
Focus, Focus Assist +, Marker, Histogram, Zebra,
AWB, White Balance, Preset Zoom3, Preset
Zoom2, Preset Zoom1, Digital Extender, OIS,
Black Compress, Black Stretch, Face Only AF,
Face Detection, AE Lock, Lolux, Bars, None]
Memo :
0
“Cancel” and “Menu” can only be assigned to
[
USER7] or [USER8].
0
“Rec”
cannot be assigned to [FOCUS
ASSIST/1], [OIS/2] and [ONLINE/3].
0
“Focus Assist +” is a combination of the “Focus
Assist” and “Expanded Focus” functions.
0
The following functions can be assigned only for
GY-HC500SPCU.
[ODK Tagging]OFF, [ODK Tagging]KO, [ODK
Tagging]KOR, [ODK Tagging]P, [ODK
Tagging]PR, [ODK Tagging]FG, [ODK
Tagging]FGB, [ODK Tagging]REMOVE
Lolux
To increase the sensitivity when in dim
surroundings, set a value in the Lolux mode.
0
When [LCD/VF]
B [Display Type] B [Gain] is set
to “dB”:
[Setting Values: R36 dB, 30 dB]
0
When [LCD/VF
]
B [Display Type] B [Gain] is set
to “ISO”:
[Setting Values: RISO 51200, ISO 25600]
Clip Review
For configuring the behavior when operating the
user button
that is assigned with the “Clip Review”
function.
0
Last 5sec:
Views about 5 seconds of the clip from the
ending.
0
Top 5sec:
Views about 5 seconds of the clip from the
beginning.
0
Clip:
Views the entire clip.
[Setting Values: RLast 5sec, Top 5sec, Clip]
Spot Meter
For configuring the behavior when operating the
user button that is assigned with the “Spot Meter”
function.
0
Max & Min:
Displays the brightest and darkest areas of the
image.
0
Max:
Displays the brightest area of the image.
0
Min:
Displays the darkest area of the image.
0
Manual:
Displays the image brightness at a specified
position.
[Setting Values: RMax & Min, Max, Min, Manual]
Memo :
0
When “HLG”
is selected in [Camera Process] B
[Color Space], the value of the spot meter
changes according to the setting of [LCD/VF] B
[Convert to ITU709]/[White Level].
116
Camera Function Menu
Menu Display and Detailed Settings