INSTRUCTIONS(BASIC)

0
Display the list of access points in the
wireless connection settings of the
smartphone, tablet terminal, or PC, and
select
“HC550-****
”
A and [HC500-
****]B. (**** are numbers that vary with
the device used.)
0
After the password confirmation screen
appears, enter the [Passphrase]
displayed on the [Connection Setup]
screen.
.
o
Cellular adapter connection (“USB”-
“Cellular”)
Configure the settings as follows according to
the screen.
0
Connection phone number
0
Username
0
Password
Caution :
0
You can access the web functions via a web
browser on devices such as a smartphone,
tablet terminal, or
PC only in a LAN environment.
0
Note that you may have to pay very high bills in
the case of pay-per-use contracts. Fixed price
contract is recommended if you are using the
network function.
0
Note that the use of improper settings may result
in expensive bills from the phone service
provider. Make sure that the setting is correct.
0
To avoid expensive bills due to the roaming
connection, you are recommended to use this
function by disabling the roaming contract.
0
There may be communication even when you
are not using the network function. Remove the
cellular adapter when the function is not in use.
3
Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the necessary
preparations for connection in
advance.
1
Set the camera recorder to the Camera
mode, and display
[Connection Setup]
(status screen).
0
Press the [STATUS] button on the camera
recorder to display the status screen. Press
the cross-shaped button (HI) to display the
[Connection Setup
] screen.
0
Check the displayed [IP Address].
2
Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the
[IP Address
] in the
address field.
(Example: 192.168.0.10)
If “192.168.0.10” is displayed in [IP Address],
enter “http://192.168.0.10”.
.
http://192.168.0.10
3
Enter the user name and password.
Enter the user name and the password on the
login screen to display the main page of the
camera.
0
Check the [Web Username] and [Web
Password] in the [Network] screen (status
screen).
Memo :
0
The user name and password can be changed
in [Network] B [Web] B
[Username] and
[Password].
32
Connecting to the Network
Network