INSTRUCTIONS

Playing Recorded Clips
To play back clips recorded in a recording media,
switch to the Media mode.
Press
and hold the [MODE] selection button in the
Camera mode to enter the Media mode. A
thumbnail screen of the clips recorded on the
recording media is displayed.
You can play back the selected clip on the
thumbnail screen.
Memo :
0
When a recording media without any clips is
inserted, “No Clips
” is displayed.
Operation Buttons
Use the operation buttons on the side control panel
or front side of the camera recorder to operate the
thumbnail screen.
.
CANCEL
MENU/THUMB
AE LEVEL
ONLINE/3 OIS/2 FOCUS ASSIST/1
TIME CODE
DISPLAY STATUS
H
I
AD B C
EFG
A
[MENU/THUMB]
Button
0
Displays the menu.
0
Press this button to close the menu screen
during menu display and return to the
thumbnail screen.
B
Cross-Shaped Button (JKHI)
Moves the cursor.
C
Set (Play) Button
0
Sets the values and items. (Confirm)
0
Plays back the selected clip.
D
[CANCEL] (Stop) Button
Cancels settings and returns to the previous
screen.
E
[FOCUS ASSIST/1] Button
0
Switches
the OK mark of the clip selected by
the cursor.
0
If an OK mark has been appended, it will be
deleted. Otherwise, an OK mark will be
appended.
F
[OIS/2] Button
0
Switches the selection status of the clip
selected by the cursor.
0
Clips being selected are displayed with
check mark.
G
[ONLINE/3
] Button
Enters the action selection screen.
H
[DISPLAY] Button
Switches between the “Standard Screen” and
“Detailed Screen”.
I
[STATUS] Button
Displays the media information screen.
Thumbnail Screen
0
“Standard Screen
” and “Detailed Screen” are
available.
Use the [DISPLAY] button to switch between the
screens.
0
Thumbnails are displayed in order of recording
from the oldest to most recent.
Standard screen
.
A
J
H
C
B
G
E
D
F
I
K
A
Recording Media Information
0
Displays
the status when repair is required for
the selected recording media or the status of
the write-protect switch for the SD card.
0
The inserted recording media will not be
displayed if [System] is different.
0
Use the [SLOT SEL] button to switch
between slots A and B. Clips from different
slots cannot be displayed at the same time.
W z
:
Write-protect switch of the SD card
in slot A is set.
S
:
SD card in slot B needs to be
restored or formatted, or is an
unsupported SD card.
G
:
SSD media in [EXT.SLOT]
Playing Recorded Clips
97
Playback