INSTRUCTIONS

4
Upload is complete.
0
After all clips are uploaded successfully,
“Successfully Completed.” is displayed.
Press the Set button (R) to return to the
thumbnail screen.
0
When clips are not uploaded successfully,
the following errors are displayed.
.
Cause of
Error
Exit
Internal Error.
Failed.
FTP Upload
(A P
249 [List of FTP Transfer Errors] )
Memo :
0
If a notification such as a an error message
appears
after shifting to the Camera mode while
FTP transfer is in progress, a 5 icon (yellow) will
appear in the media’s remaining level display
area in the Camera mode.
You can press the [MODE] button to switch to
the Media mode and display the above error
screen.
Follow “[List of FTP Transfer Errors] (A P 249)”
to clear the error message.
FTP Resume Feature
When FTP transfer starts and there is a file of the
same name on the server with a file size smaller
than
the file to be transferred, the file on the server
will be regarded as an interrupted file during a FTP
transfer. A confirmation screen to resume transfer
(append writing) appears.
.
If “Resume” is
selected, FTP transfer is carried out
such that it appends from the position where it was
interrupted.
When FTP transfer ends normally, “Complete”
appears on the screen.
Memo :
0
FTP server equipped with resume function is
required.
0
If
[Network] B [Upload Settings] B [Clip Server]
B [Clip-FTP1/2/3/4] B [Protocol] is set to
“SFTP”, the resume function is disabled.
0
If “HTTP
” is selected in the [Select FTP Proxy]
screen of the network connection setting, the
resume function is disabled.
Uploading a Recorded Video Clip
193
Network