INSTRUCTIONS

Metadata Server Item
Meta-FTP1, Meta-FTP2, Meta-FTP3, Meta-
FTP4
* The name that is set in [Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of this
camera.
The name set in this item will be displayed in the
[Import Metadata] options.
*
Enter not more than 31 characters.
o
Protocol
For setting the protocol of the FTP server to be
connected.
0
FTP:
Protocol
that does not encrypt the incoming and
outgoing data.
0
SFTP:
Protocol that encrypts incoming and outgoing
data using SSH.
0
FTPS:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an implicit mode
(starts encrypted communication once
connection starts).
0
FTPES:
Protocol that encrypts incoming and outgoing
data using SSL or TLS. It uses an explicit mode
(starts encrypted communication after
permission is granted).
[Setting Values: RFTP, SFTP, FTPS, FTPES]
o
Server
For setting the server name (“mystation.com”, etc.)
or the IP address (“192.168.0.1”, etc.) of the FTP
server.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o
Port
Enter the FTP server port number to use using an
integer between 1 and 65535.
The default value varies with the protocol setting.
(FTP: 21, SFTP: 22, FTPS: 990, FTPES: 21)
o
File Path
Enter the path name for the metadata file (“/pub/
meta.xml
”, “/home/user/meta2.xml”, etc.)
0
Enter not more than 127 characters.
o
Username
Enter the user name for connecting to the FTP
server.
*
Enter not more than 31 characters.
o
Password
Enter the password for connecting to the FTP
server.
*
Enter not more than 31 characters.
o
PASV Mode
For setting whether to set the communication mode
used for file transfer to the passive mode.
Set to “On” if the camera is inside a firewall, and a
connection from the FTP server to the camera
cannot be established.
[Setting Values: On, ROff]
Memo :
0
When [Protocol] is set to
“SFTP”, this item
appears as “---” and cannot be selected.
Upload Settings Item
Upload
For configuring the method for uploading to the
FTP server.
0
Auto:
Select this option for automatic FTP transfer.
FTP transfer starts when [Auto Upload] is
configured to “On
”.
0
Manual:
Select this option for manual FTP transfer from
the Media mode.
[Setting Values: RAuto, Manual]
Auto Upload
When [
Upload] is configured to “Auto”, FTP
transfer starts automatically when the setting is
configured to “On”.
[Setting Values: On, ROff]
Memo :
0
This is fixed at
“Off” when [System] is set to
“High-Speed”.
0
Configuring [Auto Upload] to “On” disables
configuration of all the settings under the Upload
Settings item.
148
Network Menu
Menu Display and Detailed Settings