INSTRUCTIONS

o
Port
Enter
a SRT port number using an integer between
1 and 65535.
The default value is “6504”.
Memo :
0
This
item is selectable only when [Type] is set to
“SRT”.
o
Stream ID
For setting the registered stream ID of the live
distribution destination. It allows direct streaming
of multiple cameras on a single device.
The default value varies with the product model.
*
Enter not more than 63 characters.
Memo :
0
Available when
[Type] is set to “ZIXI” or “SRT”.
o
Stream Key
Enter the stream key specified at the live
transmission destination.
There is no default value (blank).
*
Enter not more than 127 characters.
Memo :
0
Available when
[Type] is set to “RTMP” or
“RTMPS”.
o
Username
For setting the user name.
The default value is
“jvc”.
* Enter not more than 31 characters.
Memo :
0
This
item is selectable only when [Type] is set to
“RTSP/RTP”.
o
Password
For setting the [Stream ID] password.
For ZIXI, there is no default value (blank).
For
RTSP/RTP, a random alphanumeric value that
varies with each model is assigned as the default
value.
* Enter not more than 127 characters. Enter not
more than 31 characters for RTSP/RTP setting.
o
Latency A
For setting the latency mode.
[Setting Values: High, Medium, RLow, Min]
Memo :
0
This
item is selectable only when [Type] is set to
“ZIXI”.
o
PCR Mode
For configuring the low latency mode.
[Setting Values: Fast, RStandard]
Memo :
0
Available when
[Type] is set to “MPEG2-
TS/UDP”, “MPEG2-TS/RTP”, “ZIXI” or “SRT”.
0
Configuring to “Fast” minimizes the lag but the
video image may be disrupted depending on the
shooting and network conditions as priority is
given to low latency. It is intended for use in a
stable network environment to prevent packet
loss from occurring.
o
Adaptive Bit Rate
If “On” is selected, the bit rate setting value of live
streaming is set to maximum limit, and the bit rate
is changed automatically according to changes in
the network bandwidth.
[Setting Values: On, ROff]
Memo :
0
[Adaptive Bit Rate
] can be configured when
[Type] is configured to “ZIXI” or “SRT”.
* The bit rate is displayed on the status screen
only when “On” is set.
o
SMPTE 2022-1 FEC
Set to “On”
to use FEC (Forward Error Correction).
A transmission system that recovers the missing
packets in the decoding process without having to
retransmit the missing packets.
[Setting Values: On, ROff]
* The decoder must be compatible with SMPTE
2022-1.
Memo :
0
This item is selectable only when [Type] is set to
“MPEG2-TS/RTP”.
142
Network Menu
Menu Display and Detailed Settings