INSTRUCTIONS

9
3G-SDI Mapping
For configuring the mode of mapping for signals
output from the
[SDI OUT] terminal.
[Setting Values: Level B, RLevel A]
Memo :
0
SDI
output is configurable only when the setting
is set to “1080p”.
0
When [SDI OUT] is configured to “Off”, this item
cannot be configured.
9
Rec Trigger
For configuring whether to superimpose trigger
signals on the
[SDI OUT] terminal in tandem with
the [REC] button.
If “Type-A” or “Type-B” is specified, it is possible to
record on a device equipped with SDI record trigger
in tandem with the operation of the [REC] button.
When a compatible device is connected,
recording/stop control signals are output in tandem
with the operation of the [REC] button.
The record trigger output status to the connected
device is indicated by REC B /STBY B on the
display screen.
[Setting Values: Type-A, Type-B, ROff]
Memo :
0
If “Type-A” does not work, it may operate in the
“Type-B” setting, but the user’s bit to the
connected device will not be correctly output.
0
Even if REC B /STBY B is displayed on the
display screen, the compatible device may not
necessarily be recording.
0
This item can be configured when [SDI OUT] is
configured
to “On” and [Rec Mode] is configured
to “Normal”, “Pre Rec” or “Clip Continuous”.
0
Set to “Off” if connecting to a device that does
not support record trigger.
HDMI OUT
For configuring video output from the
[HDMI]
terminal.
[Setting Values: On, ROff]
Memo :
0
Monitor and menu displays are not output from
the [HDMI] terminal.
0
This item is fixed at “Off” when the [HDMI/SDI
OUT] item is displayed and a setting other than
“HDMI” is selected.
9
Resolution
For
selecting the resolution of video output from the
[HDMI] terminal according to the monitor to be
connected.
[Setting Values: 2160/60p, 2160/50p, 2160/30p,
2160/25p, 2160/24p, 1080/60p, 1080/50p,
1080/30p, 1080/25p, 1080/24p, 1080p, R1080i,
720p, 576p, 576i, 480p, 480i, 480p(2:3pd)]
Memo :
0
The selectable options vary according to the
settings in [System] B [Record Set] B [Record
Format] B [System] and [WResolution]/
[GResolution].
0
Cross conversion output is not possible.
0
When in the Camera mode, selecting
“SD” for
[System] B [Record Set] B [Record Format] B
[System] fixes the resolution at “480p” or “576p”.
9
Color
For setting the color format of HDMI signals.
[Setting Values: RGB, RAuto]
Memo :
0
This item can be configured when
[HDMI OUT]
is set to a setting other than “Off”.
A/V Set Menu
133
Menu Display and Detailed Settings