INSTRUCTIONS
Table Of Contents
- Introduction
- Preparations
- Settings and Adjustments Before Use
- Power Supply
- Power Status Display
- Turning On/Off the Power
- Initial Settings
- Displays on the LCD Monitor and Viewfinder
- Adjusting the LCD Monitor and Viewfinder
- Assignment of Functions to User Buttons
- Tally Lamp and LED
- Recording Media
- Usable Cards
- Usable SSD Media
- Estimated Recordable Time of SD Cards
- Estimated Recordable Time of SSD Media
- Inserting an SD Card
- Removing the SD Card
- Switching the SD cards
- Inserting the SSD Media Adapter
- Formatting (Initializing) of Recording Media
- Repairing the Recording Media
- Clips Recorded to Recording Media
- About the Operation Lock Feature (KEYLOCK)
- Shooting
- Basic Shooting Procedures
- Selecting System Definition, File Format and Video Format
- Zoom Operation
- Focus Operation
- Adjusting the Focusing by Face Detection
- Adjusting the Brightness
- Adjusting the Iris
- Setting the Gain
- Setting the Electronic Shutter
- Setting the ND Filter
- Adjusting the White Balance
- Adjusting the Camera Image
- Using the Image Stabilizer
- Audio Recording
- Monitoring Audio Sound During Recording Using a Headphone
- Time Code and User’s Bit
- Setting Time Code Generator
- Setting the User’s Bit
- Synchronizing Time Code on Another Camera
- Setting Zebra Pattern
- Setting Spot Meter
- Acquiring Positioning Information by GPS
- Viewing Recorded Videos Immediately (Clip Review)
- Displaying the Histogram
- Recording Simultaneously at Two Different Definitions
- Series Rec
- Dual Rec
- Backup Rec
- Special Recording
- Splitting the Clips Freely (Clip Cutter Trig)
- Configuring Infrared Recording
- Playback
- Menu Display and Detailed Settings
- Display/Status Screen
- Camera Features
- Connecting External Devices
- Network
- Functions of Network Connection
- Preparing Network Connection
- Connecting to the Network
- Importing Metadata
- Uploading a Recorded Video Clip
- FTP Resume Feature
- Connecting from a Web Browser
- Editing Metadata
- Uploading a Recording Clip via a Web Browser
- View Remote Feature
- Camera Control Function
- Changing the Settings via a Web Browser
- Managing the Network Connection Settings File
- Performing Live Streaming
- Logging in to Facebook
- Live Streaming on Facebook Live
- Logging in to YouTube
- Live Streaming on YouTube Live
- Return Video/Audio from the Network (Return over IP)
- IFB (Return Audio)
- Tagging Feature
- Overlay
- Others
GY-HC550U
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
This device contains licence-exempt
transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic
Development
Canada’s licence-exempt RSS(s).
Operation is subject to the following two
conditions:
A
This device may not cause interference.
B
This device must accept any interference,
including interference that may cause
undesired operation of the device.
The available scientific evidence does not show
that any health problems are associated with
using low power wireless devices. There is no
proof, however, that these low power wireless
devices
are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy
(RF) in the microwave range while being used.
Whereas high levels of RF can produce health
effects (by heating tissue), exposure of low-level
RF that does not produce heating effects causes
no known adverse health effects. Many studies
of low-level RF exposures have not found any
biological effects. Some studies have suggested
that some biological effects might occur, but
such findings have not been confirmed by
additional research.
The RF module, W8997-M1216 has been tested
and found to comply with FCC/ISED radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency
(RF) Exposure Guidelines and RSS-102 of the
ISED radio frequency (RF) Exposure rules.
Cet émetteur ne doit pas être co-localisé ou
utilisé en conjonction avec une autre antenne ou
un autre émetteur.
L’émetteur/récepteur exempt de licence contenu
dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement
économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes :
A
L’appareil ne doit pas produire de brouillage;
B
L’appareil doit accepter tout brouillage
radioélectrique
subi, même si le brouillage est
susceptible d’en compromettre le
fonctionnement.
Les connaissances scientifiques dont nous
disposons n’ont mis en évidence aucun
problème de santé associé à l’usage des
appareils sans fil à faible puissance. Nous ne
sommes cependant pas en mesure de prouver
que
ces appareils sans fil à faible puissance sont
entièrement sans danger. Les appareils sans fil
à faible puissance émettent une énergie
fréquence radioélectrique (RF) très faible dans
le spectre des micro-ondes lorsqu’ils sont
utilisés. Alors qu’une dose élevée de RF peut
avoir des effets sur la santé (en chauffant les
tissus), l’exposition à de faibles RF qui ne
produisent pas de chaleur n’a pas de mauvais
effets connus sur la santé. De nombreuses
études ont été menées sur les expositions aux
RF faibles et n’ont découvert aucun effet
biologique. Certaines études ont suggéré qu’il
pouvait y avoir certains effets biologiques, mais
ces résultats n’ont pas été confirmés par des
recherches supplémentaires.
Le module RF, W8997-M1216 a été testé et jugé
conforme aux limites d’exposition aux
rayonnements énoncées pour un
environnement non contrôlé et respecte les
règles les radioélectriques (RF) de la FCC lignes
directrices d'exposition et d’exposition aux
fréquences radioélectriques (RF) CNR-102 de l’
ISDE.
Safety Precautions
11
Introduction