User Guide

9
For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
Preparation before Use
Connecting the Camera to
Your Computer
To set up the camera, fi rst connect it to
your computer.
Required operating environment
Browser: Internet Explorer 9 or later
1 Attach the supplied LAN cable to
the camera.
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
BATT.
DC
AV
MIC
PLUG IN POWER
2 Connect the camera to your
computer via the LAN cable.
3 Set the network mode switch to
[LAN (OFF)].
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
DIRECT WLAN LAN(OFF)
• If the network mode switch is set to
[DIRECT] or [WLAN], the LAN terminal
cannot be used.
• While the power is on, switching the
network mode switch does not change
the setting.
Connecting the AC Adapter
Connect the supplied AC adapter to the
DC connector.
DIRECT WLAN
RESET
LAN(OFF)
ETHERNET
DC
AV
MIC
PLUG IN POWER
GVLS1_basic_US.indd 9GVLS1_basic_US.indd 9 12/12/04 10:1612/12/04 10:16