User Guide

52
Information
Lamp Status List
Status POWER (Camera) Record WPS
Power/Activation
Power off Turns off – –
Power off (Charging) Blinks slowly – –
Power on (Activating) Lights Blinks –
Power on (Activation completed) Lights – –
Network
Wireless/Wired disabled *
1
– – Turns off
Attempting connection *
2
– – Blinks slowly
Connection established *
3
– – Lights
Attempting WPS – – Blinks
Media
No access (Unrelated to the
existence of media)
– Turns off –
Shooting impossible –
Blinks quickly (only
for 2 seconds)
–
Accessing media – Blinks –
Shooting – Blinks –
Pantilter
Power off (Pantilter) – – –
Power on (Pantilter) – – –
Pantilter error – – –
Etc.
Changing the settings Blinks – –
Resetting Blinks Blinks Blinks
Updating the firmware Blinks Blinks Blinks
Formatting media Blinks Blinks Blinks
*1 Wireless (Access point) mode: No access point is registered.
Wireless (Direct) mode: –
Wired mode : LAN cable is not connected.
*2 Wireless (Access point) mode : The access point is registered, but connection has not been established yet.
Wireless (Direct) mode: No device is connected.
Wired mode : LAN cable is connected and connection has been established.
*3 Wireless (Access point) mode: Connection to the access point is established.
Wireless (Direct) mode: The device is connected to the unit.
Wired mode : LAN cable is connected, and LAN setting has been received from the DHCP
server or LAN setting is fixed.