User Guide

3
Tap “BACK UP”.
.
4
Tap on the media to copy.
.
5
Tap the desired method.
.
0
“ALL SCENES” (video)/“ALL IMAGES” (still image):
All videos or still images in this unit are copied.
0
“UNSAVED SCENES” (video)/“UNSAVED IMAGES” (still
image):
Videos or still images that have never been copied are automatically
selected and copied.
6
Check that there is sufficient remaining space on the hard disk drive and
tap “YES”.
.
0
Backup starts when “YES” is tapped.
7
After copying, tap “OK”.
.
8
Press and hold the M button for 2 seconds or more to turn off this unit
and disconnect the USB cable.
Caution :
0
Do not turn off the power or remove the USB cable until copying is
complete.
0
Files that are not on the index screen during playback cannot be copied.
0
Copying may take time. (For example, saving 1 hour video in XP mode
takes about 20 minutes.)
Playing Back Files in the USB External Hard Disk Drive
Videos or still images saved in an external hard disk drive can be played
back on this unit.
1
Select 3D or 2D mode.
.
2
Select video or still image mode.
.
3
Tap “PLAYBACK”.
.
4
Tap on the folder to play back.
.
0
Tap “J” to return to the “BACK-UP” menu.
5
Tap on the file to play back.
.
0
Tap “J” to return to the folder index screen.
0
For details on video playback, refer to ““Operation Buttons for Video
Playback” (A p. 53) ”.
“Operation Buttons for Video Playback” (A p. 53)
0
To exit, stop playback and turn off the camcorder by pressing the M
button for about 2 seconds. Then, disconnect the USB cable.
Memo :
0
Sound or video may be interrupted during playback.
0
Images recorded in 3D mode and 2D mode are displayed on the index
screen separately. Press the 3D button to switch to the desired mode for
playback.
0
3D images recorded in “MP4(MVC)” format and “AVCHD” format are
displayed on the index screen separately.
Change the setting of 3D VIDEO REC FORMAT to the desired format for
playback.
“3D VIDEO REC FORMAT (3D mode only)” (A p. 104)
Copying
85