User Guide

Operation Buttons for Still Image Recording
.
Operation Button Description
1
Parallax
Adjustment
Adjusts the 3D effect when 3D images
are displayed on the LCD monitor.
“Adjusting Parallax During Recording”
(A p. 34)
2 / 3
T/W Zoom Allows the same functions as the zoom
lever to be performed.
Camera shake that often occurs when
using the zoom lever can be minimized.
“Zooming” (A p. 31)
4
Recording/
Playback Mode
Switches between recording and
playback modes.
5
Snapshot
Q
Functions as the SNAPSHOT button.
However, focus cannot be set by
pressing halfway.
6
LCD Monitor 3D/2D
Display
Switches the display on the LCD monitor
between 3D and 2D. The image will be
recorded in 3D even if the display on the
LCD monitor is set to 2D.
7
MENU Displays the various menus of still image
recording.
“Operating the Menu” (A p. 99)
8
Display Button n
Some displays disappear after
approximately 3 seconds.
Use the n button to change the displays
as shown below.
0
Tap n button
Displays appear for approximately 3
seconds with every tap.
0
Tap and hold n button
Displays are fixed such that they do not
disappear. After setting, the display
button changes from n to m.
Tap m to release the displays.
Useful Settings for Recording
0
When “QUICK RESTART” is set to “ON”, this unit turns on immediately if
you open the LCD monitor within 5 minutes after the power is turned off
by closing the monitor.
“QUICK RESTART” (A p. 124)
0
When “AUTO POWER OFF” is set to “ON”, this unit turns itself off
automatically to conserve power when it is not operated for 5 minutes.
(only when using the battery pack)
“AUTO POWER OFF” (A p. 124)
0
When “TOUCH PRIORITY AE/AF” is set to “FACE TRACKING”, this unit
detects faces and automatically adjusts its brightness and focus to record
the faces more clearly.
“Capturing Subjects Clearly (TOUCH PRIORITY AE/AF)” (A p. 44)
0
The image resolution can be changed.
“IMAGE SIZE” (A p. 115)
Caution :
0
Do not expose the lens to direct sunlight.
0
Do not use this unit in the rain, snow, or places with high humidity like the
bathroom.
0
Do not use this unit in places subject to excessive humidity or dust, as well
as places exposed to steam or smoke directly.
0
Do not remove the battery pack, AC adapter, or SD card when the access
lamp is lighted. The recorded data may become unreadable.
Memo :
0
Before recording an important scene, it is recommended to conduct a trial
recording.
0
The digital image stabilizer does not work when recording still images.
Recording
33