Digital Video Camera Instructions

EN 7
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED
Controls
A Set Button [SET] (墌 pg. 33)
B Play/Pause Button [4/9] (墌 pg. 20)
Night-Scope Button [NIGHT] (墌 pg. 40)
Up Button
C Fast-Forward Button [ 5 ] (墌 pg. 20)
Flash Button [FLASH] (墌 pg. 39)
D Rewind Button [ 3 ] (墌 pg. 20)
Quick Review Button [QUICK REVIEW]
(墌 pg. 20)
E Stop Button [8] (墌 pg. 20)
Backlight Compensation Button
[BACKLIGHT] (墌 pg. 42)
Down Button
F Menu Button [MENU] (墌 pg. 33)
G White Balance Button [W.B] (墌 pg. 43)
Information Button [INFO] (墌 pg. 27)
H LCD Backlight Button [LCD BACKLIGHT]
(墌 pg. 16)
Data Battery Button [DATA] (墌 pg. 14)
I Fade/Wipe Button [FADE/WIPE] (墌 pg. 44)
Index Button [INDEX] (墌 pg. 27)
J Recording Start/Stop Button (墌 pg. 18)
K VIDEO/MEMORY Switch (墌 pg. 14)
L Lock Button (墌 pg. 14)
M Power Switch [A, M, PLAY, OFF] (墌 pg. 14)
N Snapshot Button [SNAPSHOT]
(墌 pg. 25, 39)
O Cassette Open/Eject Switch [OPEN/EJECT]
(墌 pg. 16)
P Power Zoom Lever [T/W] (墌 pg. 19)
Speaker/Headphone Volume Control
[VOL. +, –] (墌 pg. 20)
Q Manual Focus Dial (墌 pg. 41)
R Focus Set Button [SET] (墌 pg. 41)
S Manual Focus Button [FOCUS] (墌 pg. 41)
T Program AE Button [PROGRAM AE]
(墌 pg. 44)
U Exposure Button [EXPOSURE] (墌 pg. 41)
V Battery Release Switch [BATT. RELEASE]
(墌 pg. 13)
Connectors
The connectors are located beneath the covers.
W USB (Universal Serial Bus) Connector
(墌 pg. 48)
X Digital Video Connector [DV IN/OUT] (i.Link*)
(墌 pg. 47, 48)
* i.Link refers to the IEEE1394-1995 industry
specification and extensions thereof. The logo
is used for products compliant with the i.Link
standard.
Y Microphone connector [MIC] (墌 pg. 12, 50)
(An optional microphone can be used during
video recording and audio dubbing. To
stabilise the microphone, use of an optional
shoe adapter is recommended.)
Z Headphone connector [ ] (墌 pg. 12, 50)
(No sound is output from the speaker when
headphones are connected to this connector.)
a S-Video/Audio/Video Input/Output Connector
[S/AV] (墌 pg. 22, 46)
b DC Input Connector [DC] (墌 pg. 13)
Indicators
c POWER/CHARGE Lamp (墌 pg. 13, 18)
d Tal l y L am p ( 墌 pg. 18)
Other Parts
e LCD Monitor (墌 pg. 12)
f Card Cover [MEMORY CARD] (墌 pg. 17)
g Shoulder Strap Eyelet (墌 pg. 11)
h Grip Strap (墌 pg. 15)
i Cassette Holder Cover (墌 pg. 16)
j Speaker (墌 pg. 20)
k Remote Sensor (墌 pg. 23)
Camera Sensor
(Be careful not to cover this area, a sensor
necessary for shooting is built-in here.)
l Lens
m Flash (墌 pg. 39)
(Be careful not to cover this area in order to
obtain proper flash brightness.)
n Flash Sensor
(Be careful not to cover this area, as it
contains a sensor required by the flash.)
o Stereo Microphone (墌 pg. 50)
p Shoe
● Attach the optional stereo microphone or
video light. Make sure to turn off the power
of the camcorder and the microphone
before attaching and removing them.
● The attached microphone may be shot in
the image depending on its size.
q Battery Pack Mount (墌 pg. 13)
r Stud Hole (墌 pg. 16)
s Tripod Mounting Socket (墌 pg. 16)
GR-X5PAL.book Page 7 Thursday, April 7, 2005 7:23 PM