Master Page: Cover1 GR-DVX707EG_00-Cover.fm Page 2 Thursday, January 31, 2002 1:02 PM ENGLISH Automatic Demonstration 8 GETTING STARTED 9 DIGITAL VIDEO CAMERA GR-DVX707 GR-DVX507 GR-DVX407 GR-DVX400 VIDEO RECORDING & PLAYBACK 18 DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK 26 ADVANCED FEATURES 37 REFERENCES 80 TERMS 102 Please visit our Homepage on the World Wide Web and answer our Consumer Survey (in English only): http://www.jvc-victor.co.jp/english/index-e.
Master Page: Left-Safety GR-DVX707EG_02-08.fm Page 2 Tuesday, February 5, 2002 1:43 PM 2 EN Dear Customer, Thank you for purchasing this digital video camera. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual ● All major sections are listed in the Table Of Contents on the cover page. ● Notes appear after most subsections. Be sure to read these as well.
Master Page: Right-Safety GR-DVX707EG_02-08.fm Page 3 Thursday, January 31, 2002 11:43 AM EN 3 CAUTIONS: ● This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere.
Master Page: Left-Safety GR-DVX707EG_02-08.fm Page 4 Thursday, January 31, 2002 11:43 AM 4 EN SAFETY PRECAUTIONS Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user.
Master Page: Right-Safety GR-DVX707EG_02-08.fm Page 5 Tuesday, February 5, 2002 1:43 PM EN 5 Provided Accessories ● AC Adapter AP-V10EG or AP-V12EG ● Power Cord ● Remote Control Unit RM-V717U ● Cable Adapter ● USB Cable (GR-DVX707/507 only) ● PC Connection Cable (GR-DVX407/400 only) ● Audio/Video Cable (ø3.5 mini-plug to RCA plug) ● Editing Cable GR-DVX707/507: Both plugs have 1 ring around the pin. GR-DVX407/400: One plug has 3 rings around the pin and the other has 1 ring around the pin.
Master Page: Left GR-DVX707EG_02-08.fm Page 6 Tuesday, February 5, 2002 1:43 PM 6 EN How To Attach The Grip Belt NOTES: ● It is recommended to use the finger support so that the tally lamp or the flash (GR-DVX707/507 only) is unobstructed with your fingers. ● The grip belt can be attached to the camcorder even if the finger support is not used. Be careful not to cover the tally lamp or the flash (GR-DVX707/507 only) when holding camcorder without finger support.
Master Page: Right GR-DVX707EG_02-08.fm Page 7 Tuesday, February 5, 2002 5:45 PM EN How To Attach The Lens Cap 2) To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration. NOTE: To confirm the lens cap is on correctly make sure the cap is flush to the camcorder. 1) 3) Attach the lens cap with the cut downward. ● During shooting GR-DVX707EG_02-08.
Master Page: Left GR-DVX707EG_02-08.fm Page 8 Tuesday, February 5, 2002 1:43 PM 8 EN Automatic Demonstration Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset). 䡲 Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch is set to “A” or “M” and no cassette is in the camcorder. 䡲 Performing any operation during the demonstration stops the demonstration temporarily.
Master Page: Right-SecCover GR-DVX707EG_09-17.fm Page 9 Thursday, January 31, 2002 12:54 PM EN 9 GETTING STARTED CONTENTS Power ..................................................................................................10 Grip Adjustment .....................................................................................12 Viewfinder Adjustment ...........................................................................12 Tripod Mounting ............................................................
Master Page: Left GR-DVX707EG_09-17.fm Page 10 Saturday, February 16, 2002 12:19 PM 10 EN GETTING STARTED Power This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment. Charging The Battery Pack Lock Button BATT.RELEASE Tab Power Switch c BN-V312U (optional) Approx. 2 hr. 40 min. NOTES: ● During charging, the camcorder cannot be operated.
Master Page: Right GR-DVX707EG_09-17.fm Page 11 Thursday, January 31, 2002 1:43 PM EN INFORMATION: The optional extended-use battery pack kit is a set composed of a battery pack and AC Power Adapter/ Charger: VU-V840 KIT: BN-V840U battery pack & AAV15EG or AA-V15EK AC Power Adapter/Charger VU-V856 KIT: BN-V856U battery pack & AAV80EG or AA-V80EK AC Power Adapter/Charger Read the kit’s instruction manual before using.
Master Page: Left GR-DVX707EG_09-17.fm Page 12 Thursday, January 31, 2002 12:54 PM 12 EN GETTING STARTED (cont.) Grip Adjustment 1 2 Loosen the belt. 3 Hung your third and little fingers on the finger support so that the tally lamp or the flash (GR-DVX707/507 only) is unobstructed with your fingers. Pass your right hand through the loop and grasp the grip. Viewfinder Adjustment 1 Set the Power Switch to “A” or “M” while pressing down the Lock Button located on the switch.
Master Page: Right GR-DVX707EG_09-17.fm Page 13 Thursday, January 31, 2002 12:54 PM EN Tripod Mounting Align the screw on the tripod with the camcorder’s mounting socket. Then tighten the screw. ● Some tripods are not equipped with studs. 13 LCD Monitor And Viewfinder While using the LCD monitor: Make sure the viewfinder is pushed back in. Open the LCD monitor fully. It can rotate 270º (90º downward, 180º upward). While using the viewfinder: Make sure the LCD monitor is closed and locked.
Master Page: Left GR-DVX707EG_09-17.fm Page 14 Thursday, January 31, 2002 12:54 PM 14 EN GETTING STARTED (cont.) Operation Mode VIDEO/MEMORY Switch Position (GR-DVX707/507 only) To turn on the camcorder, set the Power Switch to any operation mode except “OFF” while pressing down the Lock Button located on the switch. POWER Lamp VIDEO/MEMORY Switch (GR-DVX707/507 only) Power Switch VIDEO: Allows you to record on a tape or play back a tape. If “REC SELECT” is set to “ / ” (墌 pg.
Master Page: Right GR-DVX707EG_09-17.fm Page 15 Thursday, January 31, 2002 12:54 PM EN Date/Time Settings The date/time is recorded onto the tape at all times, but its display can be turned on or off during playback. (墌 pg. 38, 49) 15 5 Rotate the MENU Wheel to select “CLOCK ADJ.”, and press it. The parameter for “Day” is highlighted. 6 Rotate the MENU Wheel to input the day, and press it. Repeat to input the month, year, hour and minute. POWER Lamp GR-DVX707/507 only CLOCK ADJ . 2 5 . 12 .
Master Page: Left GR-DVX707EG_09-17.fm Page 16 Tuesday, February 5, 2002 2:36 PM 16 EN GETTING STARTED (cont.) Loading A Cassette /Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 2 3 Slide down and hold OPEN/EJECT in the direction of the arrow, then pull the cassette holder cover open until it locks. The cassette holder opens automatically. ● Do not touch internal components. Insert or remove a tape and press “PUSH HERE” to close the cassette holder.
Master Page: Right GR-DVX707EG_09-17.fm Page 17 Thursday, January 31, 2002 12:54 PM EN Loading A Memory Card /Unloading A Memory Card (GR-DVX707/507 only) The provided memory card is already inserted in the camcorder at the time of purchase. 17 To protect valuable files (available only for SD Memory Card)… Write/erase protection tab Slide the write/erase protection tab on the side of the memory card in the direction of “LOCK”. This prevents the memory card from being recorded over.
Master Page: Left-SecCover GR-DVX707EG_18-25.fm Page 18 Thursday, January 31, 2002 1:45 PM 18 EN VIDEO RECORDING & PLAYBACK CONTENTS VIDEO RECORDING ..................................................................................... 19 Basic Recording ....................................................................................... 19 Tape Remaining Time ............................................................................... 19 Zooming .......................................................
Master Page: Right-Heading0 GR-DVX707EG_18-25.fm Page 19 Tuesday, February 5, 2002 2:49 PM VIDEO RECORDING EN 5 Basic Recording NOTE: Before continuing, perform the procedures listed below: ● Power (墌 pg. 10) ● Loading A Cassette (墌 pg. 16) ● Remove the lens cap (墌 pg. 7) POWER Lamp VIDEO/MEMORY Switch (GR-DVX707/507 only) 19 To stop recording, press the Recording Start/Stop Button again. The camcorder re-enters the Record-Standby mode.
Master Page: Left GR-DVX707EG_18-25.fm Page 20 Thursday, January 31, 2002 11:52 AM 20 EN VIDEO RECORDING (cont.) Zooming Produces the zoom in/out effect, or an instantaneous change in image magnification. Zoom In Turn the Power Zoom Ring towards “T”. Zoom Out Turn the Power Zoom Ring towards “W”. ● The further you turn the Power Zoom Ring, the quicker the zoom action.
Master Page: Right GR-DVX707EG_18-25.fm Page 21 Tuesday, February 5, 2002 2:49 PM EN 21 Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.
Master Page: Left-Heading0 GR-DVX707EG_18-25.fm Page 22 Tuesday, February 5, 2002 2:49 PM 22 EN VIDEO PLAYBACK To control the speaker volume… Turn the Power Zoom Ring toward “T” to turn up the volume, or toward “W” to turn down the volume. Normal Playback Stop Button (8) Rewind Button (3) Play/Pause Button (4/9) Fast-Forward Button (5) VIDEO/MEMORY Switch (GR-DVX707/507 only) Power Switch PLAY OFF A M Speaker Lock Button Power Zoom Ring (Speaker Volume Control) 1 2 Load a cassette. (墌 pg.
Master Page: Right GR-DVX707EG_18-25.fm Page 23 Tuesday, February 5, 2002 2:49 PM EN 6 Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption. (墌 pg. 21) Stop Button (8) VIDEO/MEMORY Switch (GR-DVX707/507 only) Power Switch OFF A M PLAY MENU Wheel Lock Button 1 2 Load a cassette. (墌 pg. 16) 3 Set the Power Switch to “P” while pressing down the Lock Button located on the switch. 4 Press the MENU Wheel in. The Menu Screen appears.
Master Page: Left GR-DVX707EG_18-25.fm Page 24 Thursday, January 31, 2002 11:52 AM 24 EN VIDEO PLAYBACK (cont.) Connections To A TV Or VCR A. Use the provided Audio/Video cable and optional S-Video cable. To TV or VCR To S-VIDEO S-Video cable (optional) Audio/Video cable [miniplug to RCA plug] (provided) Connector Covers*** To S-VIDEO IN TV White to AUDIO L IN* Red to AUDIO R IN* Yellow to VIDEO IN** To AV VCR * The Audio cable is not required for watching still images only.
Master Page: Right GR-DVX707EG_18-25.fm Page 25 Thursday, January 31, 2002 11:52 AM EN 1 2 25 Make sure all units are turned off. NOTE: Connect the camcorder to a TV or VCR as shown in the illustration. (墌 pg. 24) If using a VCR, go to step 3. If not, go to step 4. How to open the LCD monitor when using the connectors beneath the cover... 3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual. 4 5 Turn on the camcorder, the VCR and the TV.
Master Page: Left-SecCover GR-DVX707EG_26-36.fm Page 26 Thursday, January 31, 2002 1:03 PM 26 EN DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK The D.S.C. (Digital Still Camera) features are available on GR-DVX707 and GR-DVX507. CONTENTS D.S.C. RECORDING ...................................................................................... 27 Basic Shooting (D.S.C. Snapshot) ............................................................... 27 D.S.C. PLAYBACK .............................................
Master Page: Right-Heading0 GR-DVX707EG_26-36.fm Page 27 Tuesday, February 5, 2002 2:54 PM D.S.C. RECORDING EN Basic Shooting (D.S.C. Snapshot) A You can use your camcorder as a Digital Still Camera for taking snapshots. Still images are stored in the memory card. NOTE: Before continuing, perform the procedures listed below: ● Power (墌 pg. 10) ● Loading A Memory Card (墌 pg. 17) ● Remove the lens cap (墌 pg.
Master Page: Left-Heading0 GR-DVX707EG_26-36.fm Page 28 Tuesday, February 5, 2002 2:54 PM 28 EN D.S.C. PLAYBACK Normal Playback Of Images Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album.
Master Page: Right GR-DVX707EG_26-36.fm Page 29 Saturday, February 16, 2002 12:06 PM EN Playback Of Video Clips (GR-DVX707 only) You can view video clips (墌 pg. 60) stored in the memory card. 1 2 3 Load a memory card. (墌 pg. 17) 4 Open the LCD monitor fully, or pull out the viewfinder fully. ● The type of file (IMAGE, E-MAIL CLIP or SOUND) which has been played back at the last time is displayed. 5 If the image playback (IMAGE) or the digital sound playback (SOUND) screen appears, press SELECT.
Master Page: Left GR-DVX707EG_26-36.fm Page 30 Tuesday, February 5, 2002 2:54 PM 30 EN D.S.C. PLAYBACK (cont.) Index Playback Of Files You can view several different files stored in the memory card at a time. This browsing capability makes it easy to locate a particular file you want. 1 For Index Playback of image files, perform 1 – 6 in “Normal Playback Of Images” (墌 pg. 28). For Index Playback of video clip files, perform 1 – 6 in “Playback Of Video Clips (GR-DVX707 only)” (墌 pg. 29).
Master Page: Right GR-DVX707EG_26-36.fm Page 31 Thursday, January 31, 2002 1:03 PM EN Removing On-Screen Display 1 Perform steps 1 – 6 of “Normal Playback Of Images” (墌 pg. 28). 2 Press the MENU Wheel in. The Menu Screen appears. 3 Rotate the MENU Wheel to select “n DISPLAY”, and press it. The Sub Menu appears. 4 Rotate the MENU Wheel to select “OFF”, and press it. The operation mode indicator and battery indicator ( ) disappear. ● To display the indicators again, select “ON”.
Master Page: Left GR-DVX707EG_26-36.fm Page 32 Tuesday, February 5, 2002 2:54 PM 32 EN 8 Rotate the MENU Wheel to select “PROTECT”, and press it. The Sub Menu appears. D.S.C. PLAYBACK (cont.) To Remove Protection MENU PROTECT DELETE DPOF NO . RESET FORMAT D I SPLAY END Before doing the following, perform steps 1 – 8 in “Protecting Files” (墌 pg. 31).
Master Page: Right GR-DVX707EG_26-36.fm Page 33 Thursday, January 31, 2002 1:03 PM EN 33 To delete the currently displayed file Deleting Files 9 Previously stored files can be deleted either one at a time or all at once. SELECT Button (GR-DVX707 only) Rewind Button (3) Fast-Forward Button (5) Rotate the MENU Wheel to select “CURRENT”, and press it. The DELETE screen appears. 10 ME NU DELETE CURRENT ALL RETURN Press 3 or 5 to select the desired file.
Master Page: Left GR-DVX707EG_26-36.fm Page 34 Thursday, January 31, 2002 1:03 PM 34 EN D.S.C. PLAYBACK (cont.) Making A New Folder New still pictures you are going to take can be separated from previously shot pictures by resetting the file name to DVC00001; these new pictures will be stored in a new folder. 1 2 3 Load a memory card. (墌 pg. 17) 4 Open the LCD monitor fully, or pull out the viewfinder fully.
Master Page: Right GR-DVX707EG_26-36.fm Page 35 Thursday, January 31, 2002 1:03 PM EN 10 Rotate the MENU DPOF Wheel to select “EXECUTE”, and press it. The normal AL L 1 ? playback screen appears. EXECUTE RETURN ● To cancel selection, rotate the MENU Wheel to select “RETURN”, and press it. To Print By Selecting Still Images And Number Of Prints 1 Perform steps 1 – 8 in “To Print All Still Images (One Print For Each)” (墌 pg. 34). 2 Rotate the MENU Wheel to select “CURRENT”, and press it.
Master Page: Left GR-DVX707EG_26-36.fm Page 36 Tuesday, February 5, 2002 2:54 PM 36 EN D.S.C. PLAYBACK (cont.) Initialising A Memory Card You can initialise a memory card anytime. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared. VIDEO/MEMORY Switch Power Switch 6 Rotate the MENU Wheel to select “EXECUTE”, and press it. The memory card is initialised.
Master Page: Right-SecCover GR-DVX707EG_37-79.fm Page 37 Thursday, January 31, 2002 1:48 PM EN 37 ADVANCED FEATURES CONTENTS MENUS FOR DETAILED ADJUSTMENT ............................................................ 38 Changing The Menu Settings ........................................................................ 38 RECORDING MENUS .................................................................................... 40 Wipe Or Fader Effects .............................................................
Master Page: Left-Heading0 GR-DVX707EG_37-79.fm Page 38 Thursday, January 31, 2002 12:19 PM 38 EN MENUS FOR DETAILED ADJUSTMENT Changing The Menu Settings This camcorder is equipped with an easy-to-use, onscreen menu system that simplifies many of the more detailed camcorder settings. (墌 pg. 40 – 52) VIDEO/MEMORY Switch Rotate the MENU Wheel to select the desired function, and press it. The selected function menu appears. 5 Setting procedure hereafter depends on the selected function.
Master Page: Right GR-DVX707EG_37-79.fm Page 39 Tuesday, February 5, 2002 3:00 PM EN Menus with Sub Menus — m CAMERA, q MANUAL, s SYSTEM, n DISPLAY, o DSC (GR-DVX707/507 only), t VIDEO 1) Rotate the MENU Wheel to select the desired function and press it. The Sub Menu appears. Example: m CAMERA Menu Selected function icon is displayed in reverse.
Master Page: Left-Heading0 GR-DVX707EG_37-79.fm Page 40 Monday, April 15, 2002 5:27 PM 40 EN RECORDING MENUS Wipe or Fader works when video recording is started or stopped. Wipe Or Fader Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. IMPORTANT: Some Wipe/Fader Effects cannot be used with certain modes of Program AE with special effects. (墌 pg.
Master Page: Right GR-DVX707EG_37-79.fm Page 41 Monday, April 15, 2002 5:27 PM EN WIPE/FADER Indicator — ( Parameter 41 : Factory-preset) Description OFF Disables effects. FADER–WHITE Fade in or out with a white screen. FADER–BLACK Fade in or out with a black screen. FADER–B.W Fade in to a colour screen from a black and white screen, or fade out from colour to black and white.
Master Page: Left GR-DVX707EG_37-79.fm Page 42 Monday, April 15, 2002 5:27 PM 42 EN RECORDING MENUS (cont.) Program AE With Special Effects IMPORTANT: Some modes of Program AE with special effects cannot be used with certain Wipe/Fader effects. (墌 pg. 40) If an unusable mode is selected, the indicator of Wipe/Fader effects blinks or goes out. 1 Set the Power Switch to “M” while pressing down the Lock Button located on the switch. 2 Open the LCD monitor fully, or pull out the viewfinder fully.
Master Page: Right GR-DVX707EG_37-79.fm Page 43 Monday, April 15, 2002 5:27 PM EN 43 Slow Shutter (GR-DVX507/407/400 only) Lights dark subjects or areas even brighter than they would be under good natural lighting. Use “SLOW 10X” or “SLOW 4X” only in dark areas. NOTES: ● When using “SLOW 10X” or “SLOW 4X”, the image takes on a strobe-like effect. ● When using “SLOW 10X” or “SLOW 4X”, it may be difficult to bring the camcorder into focus.
Master Page: Left GR-DVX707EG_37-79.fm Page 44 Monday, April 15, 2002 5:27 PM 44 EN RECORDING MENUS (cont.) Camera Menu CAMERA ( : Factory-preset) Recording mode Allows you to set the recording mode (SP or LP) depending on your preference. NOTES: ● Audio Dubbing (墌 pg. 70) and Insert Editing (墌 pg. 72) are possible on tapes recorded in the SP mode. ● If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
Master Page: Right GR-DVX707EG_37-79.fm Page 45 Monday, April 15, 2002 5:27 PM EN 45 Snapshot mode for video recording For details on the procedure, refer to “Snapshot (For Video Recording)” (墌 pg. 53). SNAP MODE FULL Snapshot mode with no frame PIN-UP Pin-Up mode FRAME Snapshot mode with frame There is the sound effect of a shutter closing. Gain up GAIN UP OFF Allows you to shoot dark scenes with no picture brightness adjustment.
Master Page: Left GR-DVX707EG_37-79.fm Page 46 Tuesday, February 5, 2002 3:00 PM 46 EN RECORDING MENUS (cont.) Manual Menu MANUAL ( : Factory-preset) Digital Image Stabilisation DIS OFF ON To compensate for unstable images caused by camera-shake, particularly at high magnification. NOTES: ● Accurate stabilisation may not be possible if hand shake is excessive, or under the following conditions: • When shooting subjects with vertical or horizontal stripes. • When shooting dark or dim subjects.
Master Page: Right GR-DVX707EG_37-79.fm Page 47 Thursday, January 31, 2002 12:19 PM EN 47 Wind cut WIND CUT OFF Disengages the function. ON Helps cut down on noise created by wind. The “ ” indicator appears. The quality of the sound will change. This is normal. Snapshot flash mode (GR-DVX707/507 only) FLASH AUTO Refer to “Snapshot Flash (GR-DVX707/507 only)” (墌 pg. 54). AUTO C ON OFF Flash brightness adjustment (GR-DVX707/507 only) FLASH ADJ. ±3 GR-DVX707EG_37-79.
Master Page: Left GR-DVX707EG_37-79.fm Page 48 Thursday, January 31, 2002 12:19 PM 48 EN RECORDING MENUS (cont.) System Menu SYSTEM ( : Factory-preset) Beep, melody and shutter sound BEEP OFF Even though not heard while shooting, shutter sound is recorded on the tape. BEEP The beep sounds when the power is turned on or off, and at the beginning and end of recording. It also activates the shutter sound effect. (墌 pg.
Master Page: Right GR-DVX707EG_37-79.fm Page 49 Thursday, January 31, 2002 12:19 PM EN 49 Resetting menu settings CAM RESET CANCEL Does not reset the settings to the factory-preset. EXECUTE Resets all settings to the factory-preset. Sound input (GR-DVX707 only) SOUND IN MIC Enables sound input from camcorder’s stereo microphone, when Audio Dubbing (墌 pg. 70) is executed. “MIC” appears on the Audio Dubbing screen. D.
Master Page: Left GR-DVX707EG_37-79.fm Page 50 Tuesday, February 5, 2002 3:00 PM 50 EN RECORDING MENUS (cont.) DSC Menu (GR-DVX707/507 only) DSC ( : Factory-preset) Picture quality QUALITY FINE STANDARD The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available: FINE and STANDARD (in order of quality).
Master Page: Right GR-DVX707EG_37-79.fm Page 51 Tuesday, February 5, 2002 3:00 PM PLAYBACK MENUS EN 51 Video Menu VIDEO ( : Factory-preset) Playback sound During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on page 38, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter.
Master Page: Left-Heading0 GR-DVX707EG_37-79.fm Page 52 Thursday, January 31, 2002 12:19 PM 52 EN PLAYBACK MENUS (cont.) System Menu SYSTEM BEEP ( 墌 pg. 48 OFF BEEP MELODY TALLY : Factory-preset) Each setting is linked with “s SYSTEM”, which appears when the Power Switch is set to “M”. (墌 pg. 38) The parameters are the same as in the description on page 48. 墌 pg. 48 OFF ON ID NUMBER (GR-DVX407/ 400 only) 墌 pg. 48 DEMO MODE 墌 pg. 48 OFF ON Display Menu DISPLAY ON SCREEN ( 墌 pg.
Master Page: Right-Heading0 GR-DVX707EG_37-79.fm Page 53 Tuesday, February 5, 2002 3:00 PM FEATURES FOR RECORDING EN Night-Scope Snapshot (For Video Recording) This feature lets you record still images that look like photographs onto a tape. NIGHT Button VIDEO/MEMORY Switch (GR-DVX707/507 only) Power Switch OFF A M PLAY SNAPSHOT Button MENU Wheel Lock Button Makes dark subjects or areas even brighter than they would be under good natural lighting.
Master Page: Left GR-DVX707EG_37-79.fm Page 54 Thursday, January 31, 2002 12:19 PM 54 EN FEATURES FOR RECORDING (cont.) Snapshot Flash (GR-DVX707/ 507 only) VIDEO/MEMORY Switch subject at a distance where the flash light cannot reach (over approx. 2 m), set the flash to “OFF” to prevent the picture from becoming too dark or becoming too tinted. ● The colour tone changes depending on the background lighting conditions, such as under fluorescent or halogen lamps.
Master Page: Right GR-DVX707EG_37-79.fm Page 55 Thursday, January 31, 2002 12:19 PM EN Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity. Focus detection zone Manual Focus NOTE: If you are using the viewfinder, you should already have performed “Viewfinder Adjustment” (墌 pg. 12). 1 Set the Power Switch to “M” while pressing down the Lock Button located on the switch. 2 Press FOCUS.
Master Page: Left GR-DVX707EG_37-79.fm Page 56 Thursday, January 31, 2002 12:19 PM 56 EN FEATURES FOR RECORDING (cont.) MENU Wheel VIDEO/MEMORY Switch (GR-DVX707/507 only) Power Switch OFF A M PLAY EXPOSURE Button (GR-DVX407/400 only) To return to automatic exposure control... For GR-DVX707/507: Set “p EXPOSURE” to “AUTO”. (墌 pg. 43) Or, set the Power Switch to “A”. For GR-DVX407/400: Press EXPOSURE twice. Or, set the Power Switch to “A”.
Master Page: Right GR-DVX707EG_37-79.fm Page 57 Thursday, January 31, 2002 12:19 PM EN 2 Iris Lock MENU Wheel BACKLIGHT Button VIDEO/MEMORY Switch (GR-DVX707/ 507 only) 57 Adjust zoom so that the subject fills the LCD monitor or the viewfinder, then press and hold the MENU Wheel for over 2 seconds. The exposure control indicator and the “ ” indication appear. Press the MENU Wheel in. The “ ” indication changes to “ ” and the iris is locked.
Master Page: Left GR-DVX707EG_37-79.fm Page 58 Thursday, January 31, 2002 12:19 PM 58 EN FEATURES FOR RECORDING (cont.) White Balance Adjustment The white balance that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional colour/tint reproduction.
Master Page: Right GR-DVX707EG_37-79.fm Page 59 Tuesday, February 5, 2002 3:00 PM EN Recording Digital Sound Effects (GR-DVX707 only) 8 Press the MENU Wheel in. Selection is complete. ● Pressing D.SOUND S P 10min REC starts playback of the currently selected sound effect. You can check it without EXPLOS ION recording it onto the tape. Press D.SOUND again to stop the sound effect playback midway. 9 Press D.SOUND during recording.
Master Page: Left GR-DVX707EG_37-79.fm Page 60 Thursday, January 31, 2002 12:19 PM 60 EN FEATURES FOR RECORDING (cont.) To make video clips from real-time camera image E-Mail Clip Recording (GR-DVX707 only) You can make video clips in 160 x 120 pixels from real-time camera image or recorded video footage and store them in a memory card as files which can be conveniently sent via E-Mail.
Master Page: Right GR-DVX707EG_37-79.fm Page 61 Tuesday, February 5, 2002 3:00 PM EN To make video clips from recorded video footage MENU Wheel Play/Pause Button (4/9) VIDEO/MEMORY Switch Recording Start/ Stop Button Power Switch PLAY OFF A M E-MAIL Button Lock Button 1 2 3 4 Load a cassette. (墌 pg. 16) 5 6 Press 4/9 to start video playback. 7 At the point you want to start dubbing, press the Recording Start/Stop Button to start E-Mail Clip Recording.
Master Page: Left-Heading0 GR-DVX707EG_37-79.fm Page 62 Thursday, February 7, 2002 4:23 PM 62 EN DUBBING Dubbing To A VCR . To AV To S-VIDEO Connector Covers** S-Video cable (optional) Audio/Video cable [miniplug to RCA plug] (provided) 1 Following the illustrations, connect the camcorder and the VCR. Also refer to pages 24 and 25. 2 Set the camcorder’s VIDEO/MEMORY Switch to “VIDEO”.
Master Page: Right GR-DVX707EG_37-79.fm Page 63 Tuesday, February 5, 2002 3:00 PM EN Dubbing To A Video Unit Equipped With A DV IN Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. Since a digital signal is sent, there is little if any image or sound deterioration. 63 1 2 Make sure all units are turned off. 3 Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO”.
Master Page: Left GR-DVX707EG_37-79.fm Page 64 Tuesday, February 5, 2002 3:00 PM 64 EN DUBBING (cont.) Dubbing From A Video Unit Equipped With A DV OUT Connector (Digital Dubbing) (GR-DVX707/507/407 only) It is also possible to copy recorded scenes from another video unit equipped with a DV connector onto the camcorder. Since a digital signal is sent, there is little if any image or sound deterioration. 1 2 Make sure all units are turned off. 3 Set this camcorder’s VIDEO/MEMORY Switch to “VIDEO”.
Master Page: Right GR-DVX707EG_37-79.fm Page 65 Thursday, January 31, 2002 2:07 PM EN Dubbing Still Images Recorded On A Tape To A Memory Card (GR-DVX707/507 only) Still images can be dubbed from a tape to a memory card. Play/Pause Button (4/9) 65 NOTES: ● If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed. ● If an image recorded on the tape using “WIDE MODE” (墌 pg.
Master Page: Left-Heading0 GR-DVX707EG_37-79.fm Page 66 Thursday, January 31, 2002 12:19 PM 66 EN USING THE REMOTE CONTROL UNIT The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. (墌 pg. 68) Installing The Batteries Beam Effective Area (indoor use) The remote control uses two “AAA (R03)” size batteries.
Master Page: Right GR-DVX707EG_37-79.fm Page 67 Saturday, February 16, 2002 12:08 PM EN 67 Functions Buttons With the camcorder’s Power Switch set to “A” or “M”. A Infrared beam transmitting window Transmits the beam signal. B Zoom (T/W) Buttons Zoom in/out (墌 pg. 20) With the camcorder’s Power Switch set to “P”. Zoom in/out (墌 pg. 68) C DISPLAY Button 墌 pg. 25, 62, 74 D SHIFT Button 墌 pg. 68, 73 E SLOW Rewind/Forward Buttons Left/Right Buttons 墌 pg. 68 墌 pg.
Master Page: Left GR-DVX707EG_37-79.fm Page 68 Friday, February 8, 2002 10:53 AM 68 EN USING THE REMOTE CONTROL UNIT (cont.) Frame-By-Frame Playback . Remote sensor Allows frame-by-frame search during video playback. During normal or still playback, press SLOW (IU) repeatedly for forward or SLOW (YI) repeatedly for reverse. Each time SLOW (YI or IU) is pressed, the frame is played back. Playback Zoom Magnifies the recorded image up to 20X at any time during video playback.
Master Page: Right GR-DVX707EG_37-79.fm Page 69 Thursday, January 31, 2002 12:19 PM EN Playback Special Effects 69 1) To start playback, press PLAY (U). 2) Press EFFECT. The PLA Y BACK E F F E C T PLAYBACK EFFECT OF F Select Menu appears. 1 C L A S S I C F I LM 3) Press EFFECT repeatedly 2 MONO T ON E 3 SEP I A to move the highlight 4 S T ROB E bar to the desired effect. ● The selected function is activated and after 2 seconds the menu disappears.
Master Page: Left GR-DVX707EG_37-79.fm Page 70 Thursday, January 31, 2002 12:19 PM 70 EN USING THE REMOTE CONTROL UNIT (cont.) Audio Dubbing The audio track can be customised only when recorded in the 12-bit and SP modes. (墌 pg. 44) 1 Play back the tape to locate the point where editing will start, then press PAUSE (9). 2 While holding A. DUB (D) on the remote control, press PAUSE (9). The “9D” indicator appears. 3 Press PLAY (U), then begin “narrating”. GR-DVX707 only Speak into the microphone.
Master Page: Right GR-DVX707EG_37-79.fm Page 71 Thursday, January 31, 2002 12:19 PM EN Audio Dubbing Using Digital Sound Effects (GR-DVX707 only) 5 Rotate the MENU APPLAUSE Wheel to select “BRETURN”, and press it twice. The Menu Screen closes and the sound effect indication appears. 7 Press INDEX to access the sound effects Index Screen. 8 Rotate the MENU Wheel to select the desired sound effect and press it. 9 Press PLAY (U) to begin Audio Dubbing.
Master Page: Left GR-DVX707EG_37-79.fm Page 72 Thursday, January 31, 2002 12:19 PM 72 EN USING THE REMOTE CONTROL UNIT (cont.) Insert Editing You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in and outpoints. The original audio remains unchanged. Remote sensor 4 Press START/STOP to begin editing. ● Confirm the insert at the time code you checked in step 1. ● To pause editing, press START/STOP.
Master Page: Right GR-DVX707EG_37-79.fm Page 73 Tuesday, February 5, 2002 5:05 PM EN Random Assemble Editing [R.A.Edit] Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR (Multi-Brand Remote) is set to operate with your brand of VCR (see “VCR CODE LIST”), but can also be performed by operating the VCR manually.
Master Page: Left GR-DVX707EG_37-79.fm Page 74 Tuesday, February 5, 2002 3:00 PM 74 EN USING THE REMOTE CONTROL UNIT (cont.) Make Connections 1 A A JVC VCR equipped with a Remote PAUSE connector… …Connect the editing cable to the Remote PAUSE connector. B A JVC VCR not equipped with a Remote PAUSE connector but equipped with an R.A.EDIT connector… …Connect the editing cable to the R.A.EDIT connector. C A VCR other than above… …Connect the editing cable to the remote control’s PAUSE IN connector.
Master Page: Right GR-DVX707EG_37-79.fm Page 75 Thursday, January 31, 2002 12:19 PM EN 75 ● Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed. ● If you select a Wipe/Fader effect for an Edit-Out point, the effect is automatically applied to the following Edit-In point. ● When you use Wipe/Fader effects, that time is included in the total time. Select Scenes Remote sensor 11 If using Playback Special Effects, press EFFECT. (墌 pg.
Master Page: Left GR-DVX707EG_37-79.fm Page 76 Thursday, January 31, 2002 12:19 PM 76 EN USING THE REMOTE CONTROL UNIT (cont.) 13 Automatic Editing To VCR Rewind the tape in the camcorder to the beginning of the scene you want to edit and press PAUSE (9). 14 Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (79), or manually engage the VCR’s Record-Pause mode.
Master Page: Right GR-DVX707EG_37-79.fm Page 77 Tuesday, February 5, 2002 3:00 PM EN 77 For More Accurate Editing 3 Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you have recorded scenes you did not want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.
Master Page: Left-Heading0 GR-DVX707EG_37-79.fm Page 78 Tuesday, February 5, 2002 3:00 PM 78 EN SYSTEM CONNECTIONS Connection To A Personal Computer [A] Using USB or PC connection cable GR-DVX407/400 only To RS-232C To PC PC connection cable (provided) USB cable (provided) Open the connector cover. To USB connector To USB PC GR-DVX707/507 only OR [B] Using DV cable DV cable (optional) To DV Open the connector cover.
Master Page: Right GR-DVX707EG_37-79.fm Page 79 Tuesday, February 5, 2002 3:00 PM EN Using The Camcorder As A WebCam (GR-DVX707 only) This camcorder can be used as a WebCam via USB connection. VIDEO/MEMORY Switch 79 1 Make sure all necessary software (provided) are installed in your PC and all units are turned off. 2 Connect the camcorder to your PC using the USB cable. 3 4 Set the VIDEO/MEMORY Switch to “MEMORY”.
Master Page: Left-SecCover GR-DVX707EG_80-103.fm Page 80 Thursday, January 31, 2002 1:55 PM 80 EN REFERENCES CONTENTS DETAILS ..................................................................................................... 81 TROUBLESHOOTING .................................................................................... 82 CAUTIONS ................................................................................................. 88 USER MAINTENANCE .................................................
Master Page: Right-Heading0 GR-DVX707EG_80-103.fm Page 81 Thursday, January 31, 2002 12:47 PM DETAILS EN 81 ITEMS NOTES V Power (墌 pg. 10) ● Perform charging where the temperature is between 10°C and 35°C. 20°C to 25°C is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. ● Charging times noted above are for a fully discharged battery pack. ● Charging time varies according to the ambient temperature and the status of the battery pack.
Master Page: Left-Heading0 GR-DVX707EG_80-103.fm Page 82 Tuesday, February 5, 2002 3:20 PM 82 EN TROUBLESHOOTING If, after following the steps in the chart below, the problem still exists, please consult your nearest JVC dealer. The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.
Master Page: Right GR-DVX707EG_80-103.fm Page 83 Tuesday, February 5, 2002 3:20 PM EN 83 6. During recording, sound cannot be heard. 6. • The optional headphones are 6. • Connect the optional headphones to the not connected to the headphone connector headphones connector. (GR-DVX707 only). (GR-DVX707 only) (墌 pg. 95) • The sound volume of the • Adjust the sound volume headphones connector during playback. (墌 pg. 22) (GR-DVX707 only) was not adjusted appropriately.
Master Page: Left GR-DVX707EG_80-103.fm Page 84 Thursday, January 31, 2002 12:47 PM 84 EN TROUBLESHOOTING (cont.) Advanced features SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 14. The focus does not adjust automatically. 14. • Set Focus to the Auto mode. 14. • Focus is set to the Manual (墌 pg. 55) mode. • Clean the lens and check the • The recording was done in a focus again. (墌 pg. 91) dark place, or the contrast was low. • The lens is dirty or covered with condensation. 15.
Master Page: Right GR-DVX707EG_80-103.fm Page 85 Thursday, January 31, 2002 12:47 PM EN 85 24. Although Snapshot is 24. • The subject is too bright with 24. • Set “FLASH” to “ON” in MANUAL Menu. attempted, flash does not take the flash set to “AUTO” or (墌 pg. 38, 47) place. “AUTO C”. • It can take up to 10 seconds • If blinks, the flash is being to charge the flash. charged. • Set the camcorder in the • The camcorder is in the Record-Standby mode. Record mode. (墌 pg.
Master Page: Left GR-DVX707EG_80-103.fm Page 86 Thursday, January 31, 2002 12:47 PM 86 EN 31. When the image is printed from the printer, a black bar appears at the bottom of the screen. TROUBLESHOOTING (cont.) 31. • This is not a malfunction. 32. • The DV cable was plugged/ 32. When the camcorder is unplugged with power connected via the DV turned on. connector, the camcorder does not operate. 31. • By recording with “DIS” activated (墌 pg. 46) this can be avoided. 32.
Master Page: Right GR-DVX707EG_80-103.fm Page 87 Thursday, January 31, 2002 12:47 PM EN 87 40. Picture does not appear on the 40. • The viewfinder is pulled out. 40. • Push the viewfinder back in. LCD monitor. • The LCD monitor’s brightness • Adjust the brightness of the setting is too dark. LCD monitor. (墌 pg. 13) • If the monitor is tilted upward 180 degrees, open the monitor fully. (墌 pg. 13) 41. Images on the LCD monitor are jittery. 41. • The speaker volume is too great. 42.
Master Page: Left-Heading0 GR-DVX707EG_80-103.fm Page 88 Thursday, January 31, 2002 12:47 PM 88 EN General Battery Precautions If the remote control is not functioning even if it is being operated correctly, the batteries are exhausted. Replace them with fresh ones. Use only the following batteries: AAA (R03) size x 2 Please make note of the following rules for battery use. When misused, the batteries can leak or explode. 1. When replacing batteries, refer to page 66. 2.
Master Page: Right GR-DVX707EG_80-103.fm Page 89 Thursday, January 31, 2002 12:47 PM EN Memory Cards To properly use and store your memory cards, be sure to read the following cautions: 1. During use… ...make sure the memory card bears the SD or MultiMediaCard mark. ...make sure the memory card is positioned properly when inserting. 2. While the memory card is being accessed (during recording, playback, deletion, initialisation, etc.)… ...never unload the memory card and never turn off the camcorder. 3.
Master Page: Left GR-DVX707EG_80-103.fm Page 90 Tuesday, February 5, 2002 3:20 PM 90 EN CAUTIONS (cont.) How To Handle A CD-ROM • Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the centre hole using a circular motion. • Do not use conventional disc cleaners or cleaning spray.
Master Page: Right-Heading0 GR-DVX707EG_80-103.fm Page 91 Tuesday, February 5, 2002 7:30 PM USER MAINTENANCE EN After Use 91 Cleaning The Camcorder 1 2 Turn off the camcorder. 3 Press “PUSH HERE” to close the cassette holder. ● Once the cassette holder is closed, it recedes automatically. Wait until it recedes completely before closing the cassette holder cover. 4 Slide and hold the BATT.RELEASE tab to the right 1 and remove the battery pack 2.
Master Page: Left-Heading0 GR-DVX707EG_80-103.
Master Page: Right GR-DVX707EG_80-103.fm Page 93 Tuesday, February 5, 2002 3:20 PM EN For Connectors AV Video output Audio output Headphone output (GR-DVX707 only) S-VIDEO DV Input/output (GR-DVX707/507/407 only) Output (GR-DVX400 only) USB (GR-DVX707/507 only) EDIT (GR-DVX707/507 only) JLIP (GR-DVX407/400 only) PC (GR-DVX407/400 only) : : : 1 V (p-p), 75 Ω, analogue 300 mV (rms), 1 kΩ, analogue, stereo Stereo : Y: 1 V (p-p), 75 Ω, analogue output C: 0.
Master Page: Left-Heading0 GR-DVX707EG_80-103.fm Page 94 Thursday, January 31, 2002 12:47 PM 94 EN INDEX Controls, Connectors And Indicators 1 OFF A M PLAY 2 3 4 5 6 78 9 0 q w e r t GR-DVX707EG_80-103.
Master Page: Right GR-DVX707EG_80-103.fm Page 95 Saturday, February 16, 2002 12:09 PM EN Controls a •Power Zoom Ring [T/W].................... 墌 pg. 20 •Speaker Volume Control.................... 墌 pg. 22 b Recording Start/Stop Button ................ 墌 pg. 19 c Power Switch [A, M, P, OFF].......... 墌 pg. 14 d Lock Button ......................................... 墌 pg. 14 e •Snapshot Button [SNAPSHOT] .... 墌 pg. 27, 53 •Information Button [INFO] (GR-DVX707/507 only) .......................................
Master Page: Left-Heading0 GR-DVX707EG_80-103.fm Page 96 Thursday, January 31, 2002 12:47 PM 96 EN INDEX Indications Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 2 3 4 5 L P1 00 min REC 6 7 8 SOUND 12B IT 15:55 0 9 a Selected Wipe/Fader Effect Indicator (墌 pg. 40, 41) b Selected Wide Mode Indicator (墌 pg. 46) c Tape Running Indicator (墌 pg. 19) (Rotates while tape is running.) d Recording Speed Mode (SP/LP) (墌 pg. 44) e Tape Remaining Time (墌 pg.
Master Page: Right GR-DVX707EG_80-103.fm Page 97 Thursday, January 31, 2002 12:47 PM EN 97 LCD Monitor/Viewfinder Indications During D.S.C. Recording Only (GR-DVX707/507 only) 1 2 3 45 1024 15 0 0:1 5 6 a Image Size: 1280 (1280 x 960) (GR-DVX707 only), 1024 (1024 x 768) or 640 (640 x 480) (墌 pg. 50) b Shooting Icon (墌 pg. 27) (Appears and blinks during shooting.) c Card Icon (墌 pg. 27) (Appears during shooting and blinks when a memory card is not loaded: (SD Memory Card) or (MultiMediaCard).
Master Page: Left GR-DVX707EG_80-103.fm Page 98 Saturday, February 16, 2002 12:46 PM 98 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording 0g 9 1 40 x W 2 3 4 5 6 7 T q w e 3 r EXPLOSION 1 0 . 11 . 02 10 : 00 8 y a Operation Mode (墌 pg. 14) b • : Night-Scope Indicator (墌 pg. 53) (Appears when Night-Scope is engaged.) • : Gain Up Mode (墌 pg. 45) (Appears when “GAIN UP” is set to “AUTO” and the shutter speed is automatically adjusted.
Master Page: Right GR-DVX707EG_80-103.fm Page 99 Thursday, January 31, 2002 12:47 PM EN 99 LCD Monitor/Viewfinder Indications During Video Playback a Sound Mode Indicator (墌 pg. 51) b Blank Search Indicator (墌 pg. 23) c Tape Speed (墌 pg. 44) d •U : Playback 1 3 4 5 2 •5 : Fast-Forward/Shuttle Search •3 : Rewind/Shuttle Search •9 : Pause 1 2B I T / SOUND 1 SP •9 U : Forward Slow-Motion L •Y 9 : Reverse Slow-Motion •D : Audio Dubbing MIC •9D : Audio Dubbing Pause (Appear while a tape is running.
Master Page: Left-Heading0 GR-DVX707EG_80-103.fm Page 100 Tuesday, February 5, 2002 5:11 PM 100 EN INDEX Indications (cont.) Warning Indications Indications Function Displays the battery remaining power. Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically. Appears when no tape is loaded. (墌 pg.
Master Page: Right GR-DVX707EG_80-103.fm Page 101 Wednesday, February 6, 2002 10:18 AM EN Indications 101 Function ● Appears if Insert Editing is attempted on a tape recorded in the LP mode. INSERT ERROR! (墌 pg. 72) ● Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. (墌 pg. 72) MEMORY IS FULL Appears when the memory card’s memory is full and shooting is not possible.
Master Page: Left-Heading0 GR-DVX707EG_80-103.fm Page 102 Saturday, February 16, 2002 1:13 PM 102 EN TERMS A E AC Adapter ...................................................10, 11 Audio Dubbing ...................................................70 Auto Focus ..........................................................55 Auto Playback Of Images ....................................28 Auto Shut Off ................................................19, 27 E-Mail Clip Recording ................................
Master Page: Right GR-DVX707EG_02-08IX.fm Page 103 Thursday, March 28, 2002 4:36 PM EN 103 N T Night-Scope ........................................................53 Tally Lamp (TALLY) ....................................... 19, 48 Telephoto Setting (TELE MACRO) ....................... 46 Time Code (TIME CODE) ........................ 21, 49, 52 Tripod Mounting ................................................. 13 P Picture Quality (QUALITY) ..................................
Master Page: Cover4 GR-DVX707EG_00-Cover.fm Page 1 Thursday, March 28, 2002 4:37 PM EN GR-DVX707 GR-DVX507 GR-DVX407 GR-DVX400 COPYRIGHT© 2002 VICTOR COMPANY OF JAPAN, LTD. GR-DVX707EG_00-Cover.
