Digital Video Camera Instructions
Table Of Contents
- AUTOMATIC DEMONSTRATION
- GETTING STARTED
- VIDEO RECORDING & PLAYBACK
- DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
- ADVANCED FEATURES
- MENUS FOR DETAILED ADJUSTMENT
- RECORDING MENUS
- PLAYBACK MENUS
- FEATURES FOR RECORDING
- DUBBING
- Dubbing To Or From A VCR
- Dubbing To A Video Unit Equipped With A DV IN Connector (DigitalDubbing)
- Dubbing From A Video Unit Equipped With A DV OUT Connector (Digital Dubbing)
- Dubbing Still Images Recorded On A Tape To A Memory Card
- Audio Dubbing
- Audio Dubbing Using Digital Sound Effects
- Insert Editing
- Random Assemble Editing [R.A.Edit]
- SYSTEM CONNECTIONS
- REFERENCES
- TERMS
EN 9
Master Page: Right-start
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO
MODE” is set to “ON” (factory-preset).
䡲 Automatic Demonstration starts when there is no
operation for about 3 minutes after the Power
Switch is set to “A” or “M” and no cassette is in
the camcorder.
䡲 Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minute after that, the demonstration will
resume.
䡲 “DEMO MODE” remains “ON” even if the
camcorder power is turned off.
To cancel Automatic Demonstration
1
Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2 Open the LCD monitor fully, or pull out the
viewfinder fully.
3 Press MENU. The Menu Screen appears.
4 Press + or – to select “s SYSTEM”, and press
SET/SELECT. The SYSTEM Menu appears.
5 Press + or – to select “DEMO MODE”, and press
SET/SELECT. The Sub Menu appears.
6 Press + or – to select “OFF”, and press SET/
SELECT.
7 Press + or – to select “BRETURN”, and press SET/
SELECT twice. The normal screen appears.
NOTE:
Slide the lens cover down to see the actual changes
of the Automatic Demonstration activated on the
LCD monitor or viewfinder.
Automatic Demonstration
ST
M SY E
DEM– MO DE O
NO
OFF
Power Switch
Lock Button
MENU Button
Sub Menu
SET/SELECT Button
+, – Button
GR-DVP9US.book Page 9 Wednesday, January 22, 2003 5:35 PM