Digital Video Camera Instructions
Table Of Contents
- AUTOMATIC DEMONSTRATION
- GETTING STARTED
- VIDEO RECORDING & PLAYBACK
- DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK
- ADVANCED FEATURES
- MENUS FOR DETAILED ADJUSTMENT
- RECORDING MENUS
- PLAYBACK MENUS
- FEATURES FOR RECORDING
- DUBBING
- Dubbing To Or From A VCR
- Dubbing To A Video Unit Equipped With A DV IN Connector (DigitalDubbing)
- Dubbing From A Video Unit Equipped With A DV OUT Connector (Digital Dubbing)
- Dubbing Still Images Recorded On A Tape To A Memory Card
- Audio Dubbing
- Audio Dubbing Using Digital Sound Effects
- Insert Editing
- Random Assemble Editing [R.A.Edit]
- SYSTEM CONNECTIONS
- REFERENCES
- TERMS
EN 7
Master Page: Right
How To Attach The Grip Belt
1) Remove the pad and separate the two straps.
2) Thread one end of the strap g through the eyelet,
then pass the other end through the loop.
3) Repeat the same procedure to attach the strap h
to the other eyelet.
4) Connect the strap g and h and thread the strap
h through the buckle, then adjust the grip.
(墌 pg. 12)
5) Attach the pad.
How To Attach The Strap
1) Thread one end of the strap through the eyelet,
then pass the other end through the loop.
2) Attach the screw to the tripod mounting socket.
To tighten the screw firmly, use a coin, etc.
3) Adjust the length with the adjuster.
NOTES:
● You can use the strap as a shoulder strap by
adjusting the length with the adjuster.
● Because the screw may cause damage to the
camcorder, make sure to attach the screw to the
tripod mounting socket when carrying the
camcorder.
● Use the strap only with this camcorder.
● Do not grip the camcorder too firmly when the
screw is attached. Doing so may cause damage to
the tripod mounting socket.
h
g
More than 2 cm (13/16”)
GR-DVP9US.book Page 7 Wednesday, January 22, 2003 5:35 PM