Instruction Manual

EN 61
No. NAME & FUNCTION
9 Tape Remaining Indicator (Z pg. 21)
0 Recording Indicator (Z pg. 20)
! “Tape Running” Indicator (Z pg. 20)
@ Audio Dubbing/Insert Editing Mode Indicator (Z pgs. 56, 57)
# Head clog warning
At the start of recording, appears and blinks if dirt is detected on heads.
Stop recording and clean the heads using the Cleaning Cassette. (Z pg. 63)
$ “No Tape Loaded” Indicator
Appears for 15 seconds after power is turned on if there's no tape loaded.
% Clock Battery Warning
Appears when the clock (lithium) battery is not in place or exhausted.
For inserting or replacing the clock battery, refer to page 10.
^ Wind Cut Indicator (Z pg. 19)
& Date/Time Display (Z pg. 11)
* Recording Mode Indicator (Z pg. 24)
( Sound Mode Display (Z pg. 19)
) Time Code Display (Z pg. 26)
q Snapshot Indicator (Z pg. 22)
w Self-Timer Indicator (Z pg. 25)
e Focus Indicators (Z pg. 40)
r Iris Lock Indicator (Z pg. 37)
t White Balance Indicator (Z pg. 38)
y Exposure Indicator (Z pg. 36)
u Zoom Level Indicator (Z pg. 23)
i P.AE/Effect Indicator (Z pg. 33)
o FADE/WIPE Indicator (Z pg. 28)
p Playback Sound Mode Display (Z pg. 45)
— “Tape End” Indicator (Z pg. 21)
— An error number (E01, etc.) appears in the viewfinder.
Consult your nearest JVC dealer. (Z pg. 66)